Logo GNT
Actualités Tests & Guides Bons Plans
GTA 6 iPhone 17 Copilot Switch 2 Temu ChatGPT Tesla
OVH Cloud OVH Cloud
Entraide Linux Autres OS Linux Probleme demon pcmcia

Probleme demon pcmcia

2 réponses
Avatar
nitro46
Bonjour tout le monde!
Voila mon probleme:

J ai installé une mandrake 9.1 sur mon portable presario 2800EA.
Et le module pcmcia ne marche pas.
J ai installé le module pcmcia (a partir des rpms sur les cds) et
durant le demarrage, le demon semble bien lancé.
Mais lorsque je met une carte pcmcia rien ne se passe car en fait le
demon pcmcia n est pas lancé d'apres DrakXservices.
La commande /etc/init.d/pcmcia start (ou status) ne me renvoie rien et
ne lance rien.
Donc si kkun pouvait eclairé ma lanterne de nouveau linuxien :o)
Merci d avance.
Signaler un problème avec ce contenu

2 réponses

Supprimer
Cette action est irreversible, confirmez la suppression du commentaire ?
Signaler le commentaire

Veuillez sélectionner un problème

Nudité
Violence
Harcèlement
Fraude
Vente illégale
Discours haineux
Terrorisme
Autre
Avatar
Stéphane ACOUNIS
Le Thu, 24 Jul 2003 21:24:00 +0200, Oni meno Kyo a écrit:

Bonjour tout le monde!
Voila mon probleme:

J ai installé une mandrake 9.1 sur mon portable presario 2800EA. Et le
module pcmcia ne marche pas.
J ai installé le module pcmcia (a partir des rpms sur les cds) et durant
le demarrage, le demon semble bien lancé. Mais lorsque je met une carte
pcmcia rien ne se passe car en fait le demon pcmcia n est pas lancé
d'apres DrakXservices. La commande /etc/init.d/pcmcia start (ou status)
ne me renvoie rien et ne lance rien.
Donc si kkun pouvait eclairé ma lanterne de nouveau linuxien :o) Merci d
avance.


Tu devrais trouver ton bonheur sur ce site: http://www.linux-laptop.net/

Il y a une page sur le Compaq Presario 2800T, je ne sais pas si c'est un
modèle similaire. Une sur le 2805EA, mais le PCMCIA n'a pas été essayé.

Il faudrait donner plus d'infos: quand tu démarres le service pcmcia, tu
dois avoir des messages dans /var/log/messages et aussi en tapant
"dmesg". Fais nous parvenir ces messages.

--
Stéphane ACOUNIS
Q: "Are we not men?"
A: "We are DEVO"

Avatar
nitro46
Stéphane ACOUNIS wrote in message news:...
Le Thu, 24 Jul 2003 21:24:00 +0200, Oni meno Kyo a écrit:

Bonjour tout le monde!
Voila mon probleme:

J ai installé une mandrake 9.1 sur mon portable presario 2800EA. Et le
module pcmcia ne marche pas.
J ai installé le module pcmcia (a partir des rpms sur les cds) et durant
le demarrage, le demon semble bien lancé. Mais lorsque je met une carte
pcmcia rien ne se passe car en fait le demon pcmcia n est pas lancé
d'apres DrakXservices. La commande /etc/init.d/pcmcia start (ou status)
ne me renvoie rien et ne lance rien.
Donc si kkun pouvait eclairé ma lanterne de nouveau linuxien :o) Merci d
avance.


Tu devrais trouver ton bonheur sur ce site: http://www.linux-laptop.net/

Il y a une page sur le Compaq Presario 2800T, je ne sais pas si c'est un
modèle similaire. Une sur le 2805EA, mais le PCMCIA n'a pas été essayé.

Il faudrait donner plus d'infos: quand tu démarres le service pcmcia, tu
dois avoir des messages dans /var/log/messages et aussi en tapant
"dmesg". Fais nous parvenir ces messages.



Merci de bien vouloir m'aider :)
J ai une petite rectification à faire, mon portable est le presario
2528EA en fait. J ai deja ete sur le site linux-laptop ou
linux-on-laptop et ils ne m'apprennent rien ou ca marche chez eux (le
2541EA a aussi des problemes avec le pcmcia mais lors de l'unloading)
:(

Pour /var/log/messages, voila ce qu'il me dit :
Jul 25 08:54:14 Eva-00 rc: Starting pcmcia: succeeded

Pourtant lors de la demande du status du demon je n'ai aucune reponse
et drakxservices me dit qu'il est arreté.

Pour dmesg je n'ai rien trouvé de relatif au pcmcia, donc je met tout
le resultat au cas ou tu chercherais kkchose d'autre :

Linux version 2.4.21-0.13mdk () (gcc
version 3.2.2 (Mandrake Linux 9.1 3.2.2-3mdk)) #1 Fri Mar 14 15:08:06
EST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000df70000 (usable)
BIOS-e820: 000000000df70000 - 000000000df7c000 (ACPI data)
BIOS-e820: 000000000df7c000 - 000000000df80000 (ACPI NVS)
BIOS-e820: 000000000df80000 - 000000000e000000 (reserved)
BIOS-e820: 000000001df80000 - 000000001e000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
223MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 57200
zone(0): 4096 pages.
zone(1): 53104 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 PTLTD ) @ 0x000f6c90
ACPI: RSDT (v001 PTLTD RSDT 01540.00000) @ 0x0df75548
ACPI: FADT (v001 ATI Salmon 01540.00000) @ 0x0df7bf64
ACPI: BOOT (v001 PTLTD $SBFTBL$ 01540.00000) @ 0x0df7bfd8
ACPI: DSDT (v001 ATI MS2_1535 01540.00000) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: MADT not present
Kernel command line: BOOT_IMAGE=Mandrake9.1 ro root05 quiet
devfs=mount hdc=ide-scsi acpi=on
ide_setup: hdc=ide-scsi
No local APIC present or hardware disabled
Initializing CPU#0
Detected 2392.314 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 4771.02 BogoMIPS
Memory: 222848k/228800k available (1410k kernel code, 5564k reserved,
1118k data, 136k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebf9ff 00000000 00000000 00000000
CPU: Common caps: bfebf9ff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ()
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030122
PCI: PCI BIOS revision 2.10 entry at 0xfd89b, last bus=2
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S3 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK0] (IRQs 7 10, disabled)
ACPI: PCI Interrupt Link [LNK1] (IRQs 7 *10)
ACPI: PCI Interrupt Link [LNK2] (IRQs 7 *10)
ACPI: PCI Interrupt Link [LNK3] (IRQs 7 *10)
ACPI: PCI Interrupt Link [LNK4] (IRQs 7 10, disabled)
ACPI: PCI Interrupt Link [LNK5] (IRQs 7 *11)
ACPI: PCI Interrupt Link [LNK6] (IRQs 7 10, disabled)
ACPI: PCI Interrupt Link [LNK7] (IRQs *5)
ACPI: PCI Interrupt Link [LNK8] (IRQs 7 10, disabled)
ACPI: Embedded Controller [EC0] (gpe 24)
schedule_task(): keventd has not started
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNK8] enabled at IRQ 10
PCI: No IRQ known for interrupt pin A of device 00:10.0
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch ()
devfs: boot_options: 0x1
vesafb: framebuffer at 0xdc000000, mapped to 0xce80c000, size 32704k
vesafb: mode is 800x600x16, linelength00, pages3
vesafb: protected mode interface info at c000:51c1
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 25593 bytes).
Console: switching to colour frame buffer device 80x16
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS
MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS01 at 0x02f8 (irq = 3) is a 16550A
PCI: Enabling device 00:08.0 (0000 -> 0003)
Redundant entry in serial pci_table. Please send the output of
lspci -vv, this message (10b9,5457,103c,0850)
and the manufacturer and name of serial board or modem board
to
register_serial(): autoconfig failed
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
ALI15X3: IDE controller at PCI slot 00:10.0
PCI: No IRQ known for interrupt pin A of device 00:10.0
ALI15X3: chipset revision 196
ALI15X3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2040-0x2047, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2048-0x204f, BIOS settings: hdc:pio, hdd:pio
hda: IC25N040ATCS04-0, ATA DISK drive
blk: queue c03cb420, I/O limit 4095Mb (mask 0xffffffff)
hdc: TOSHIBA DVD-ROM SD-R2312, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 78140160 sectors (40008 MB) w/1768KiB Cache, CHSH64/255/63,
UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
md: md driver 0.90.0 MAX_MD_DEVS%6, MD_SB_DISKS'
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 107k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 15:32:56 Mar 14 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0x2000, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0x2020, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
PCI: Enabling device 00:0b.2 (0010 -> 0012)
ehci-hcd 00:0b.2: VIA Technologies, Inc. USB 2.0
ehci-hcd 00:0b.2: irq 11, pci mem d0946000
usb.c: new USB bus registered, assigned bus number 3
ehci-hcd 00:0b.2: USB 2.0 enabled, EHCI 0.95, driver 2002-Dec-20
hub.c: USB hub found
hub.c: 4 ports detected
usbdevfs: remount parameter error
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
Adding Swap: 506008k swap-space (priority -1)
hub.c: connect-debounce failed, port 2 disabled
hub.c: new USB device 00:0b.1-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x45e/0x40) is not claimed by any
active driver.
usb.c: registered new driver hiddev
usb.c: registered new driver hid
usb-uhci.c: interrupt, status 3, frame# 1158
input0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®]
on usb2:2.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
usb.c: registered new driver usb_mouse
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: TOSHIBA Model: DVD-ROM SD-R2312 Rev: 1905
Type: CD-ROM ANSI SCSI revision: 02
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.1a [Flags: R/O MODULE].
NTFS volume version 3.1.
natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
originally by Donald Becker
http://www.scyld.com/network/natsemi.html
2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
eth0: NatSemi DP8381[56] at 0xd0a0d000, 00:0b:cd:8b:1d:52, IRQ 10.
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Processor [CPU0] (supports C1 C2)
ACPI: Thermal Zone [THRM] (33 C)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
inserting floppy driver for 2.4.21-0.13mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
eth0: link up.
martian source 255.255.255.255 from 192.168.111.10, on dev eth0
ll header: ff:ff:ff:ff:ff:ff:00:10:4b:94:95:3a:08:00
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
Installing knfsd (copyright (C) 1996 ).
Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version
0.14.10h, 15:30:19 Mar 14 2003
PCI: Enabling device 00:06.0 (0005 -> 0007)
trident: ALi Audio Accelerator found at IO 0x1000, IRQ 5
ac97_codec: AC97 Modem codec, id: CXT41 (Unknown)
gameport0: Acer Laboratories Inc. [ALi] M5451 PCI AC-Link Controller
Audio Device at pci00:06.0 speed 2386 kHz
eth0: Promiscuous mode enabled.
device eth0 entered promiscuous mode
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
Splash status on console 0 changed to off

Voilà je reste donc dans l'obsucrité totale lol, pck je vois pas ou ca
cloche!