Voici mon problème apres tentative de mise à jour debian 3
apt-get update --> fonctionnement correct
puis
apt-get dist-upgrade --> et là problème Voici le message :
Reading Package Lists...
Building Dependency Tree...
You might want to run `apt-get -f install' to correct these.
Sorry, but the following packages have unmet dependencies:
libncurses5: Depends: libc6 (>= 2.2.4-4) but it is not installed
lynx: Depends: libc6 (>= 2.2.4-4) but it is not installed
Depends: zlib1g (>= 1:1.1.4) but it is not installed
Donc , comme il me dit..
apt-get -f install --> et là problème Voici le message :
Reading Package Lists...
Building Dependency Tree...
Correcting dependencies... Done
The following extra packages will be installed:
libc6 zlib1g
The following NEW packages will be installed:
libc6 zlib1g
0 packages upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
2 packages not fully installed or removed.
Need to get 0B/3427kB of archives. After unpacking 13.2MB will be used.
Do you want to continue? [Y/n]...........(donc Y)
(Reading database ... 116 files and directories currently installed.)
Unpacking libc6 (from .../libc6_2.2.5-11.5_i386.deb) ...
dpkg not recorded as installed, cannot check for epoch support !
Unpacking zlib1g (from .../zlib1g_1%3a1.1.4-1.0woody0_i386.deb) ...
dpkg not recorded as installed, cannot check for epoch support !
You must upgrade dpkg before installing this package.
Ensuite je tourne en rond impossible d'upgrader dpkg (message apt-get -f
install............)
Cette action est irreversible, confirmez la suppression du commentaire ?
Signaler le commentaire
Veuillez sélectionner un problème
Nudité
Violence
Harcèlement
Fraude
Vente illégale
Discours haineux
Terrorisme
Autre
david
Vincent wrote:
Bonjour,
Voici mon problème apres tentative de mise à jour debian 3
apt-get update --> fonctionnement correct puis apt-get dist-upgrade --> et là problème Voici le message :
Reading Package Lists... Building Dependency Tree... You might want to run `apt-get -f install' to correct these. Sorry, but the following packages have unmet dependencies: libncurses5: Depends: libc6 (>= 2.2.4-4) but it is not installed lynx: Depends: libc6 (>= 2.2.4-4) but it is not installed Depends: zlib1g (>= 1:1.1.4) but it is not installed
Donc , comme il me dit.. apt-get -f install --> et là problème Voici le message :
Reading Package Lists... Building Dependency Tree... Correcting dependencies... Done The following extra packages will be installed: libc6 zlib1g The following NEW packages will be installed: libc6 zlib1g 0 packages upgraded, 2 newly installed, 0 to remove and 0 not upgraded. 2 packages not fully installed or removed. Need to get 0B/3427kB of archives. After unpacking 13.2MB will be used. Do you want to continue? [Y/n]...........(donc Y) (Reading database ... 116 files and directories currently installed.) Unpacking libc6 (from .../libc6_2.2.5-11.5_i386.deb) ... dpkg not recorded as installed, cannot check for epoch support ! Unpacking zlib1g (from .../zlib1g_1%3a1.1.4-1.0woody0_i386.deb) ... dpkg not recorded as installed, cannot check for epoch support !
You must upgrade dpkg before installing this package.
Ensuite je tourne en rond impossible d'upgrader dpkg (message apt-get -f install............)
Si quelqu'un a une idée, merci.
lo,
je ne connais pas debian, mais j'ai entendu dire qu'il fallait parfois relancer plusieurs fois de suite le dist-upgrade ...
(sinon essaie aussi sur linux.debian.user.french)
Vincent wrote:
Bonjour,
Voici mon problème apres tentative de mise à jour debian 3
apt-get update --> fonctionnement correct
puis
apt-get dist-upgrade --> et là problème Voici le message :
Reading Package Lists...
Building Dependency Tree...
You might want to run `apt-get -f install' to correct these.
Sorry, but the following packages have unmet dependencies:
libncurses5: Depends: libc6 (>= 2.2.4-4) but it is not installed
lynx: Depends: libc6 (>= 2.2.4-4) but it is not installed
Depends: zlib1g (>= 1:1.1.4) but it is not installed
Donc , comme il me dit..
apt-get -f install --> et là problème Voici le message :
Reading Package Lists...
Building Dependency Tree...
Correcting dependencies... Done
The following extra packages will be installed:
libc6 zlib1g
The following NEW packages will be installed:
libc6 zlib1g
0 packages upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
2 packages not fully installed or removed.
Need to get 0B/3427kB of archives. After unpacking 13.2MB will be used.
Do you want to continue? [Y/n]...........(donc Y)
(Reading database ... 116 files and directories currently installed.)
Unpacking libc6 (from .../libc6_2.2.5-11.5_i386.deb) ...
dpkg not recorded as installed, cannot check for epoch support !
Unpacking zlib1g (from .../zlib1g_1%3a1.1.4-1.0woody0_i386.deb) ...
dpkg not recorded as installed, cannot check for epoch support !
You must upgrade dpkg before installing this package.
Ensuite je tourne en rond impossible d'upgrader dpkg (message apt-get -f
install............)
Si quelqu'un a une idée, merci.
lo,
je ne connais pas debian, mais j'ai entendu dire qu'il fallait parfois
relancer plusieurs fois de suite le dist-upgrade ...
Voici mon problème apres tentative de mise à jour debian 3
apt-get update --> fonctionnement correct puis apt-get dist-upgrade --> et là problème Voici le message :
Reading Package Lists... Building Dependency Tree... You might want to run `apt-get -f install' to correct these. Sorry, but the following packages have unmet dependencies: libncurses5: Depends: libc6 (>= 2.2.4-4) but it is not installed lynx: Depends: libc6 (>= 2.2.4-4) but it is not installed Depends: zlib1g (>= 1:1.1.4) but it is not installed
Donc , comme il me dit.. apt-get -f install --> et là problème Voici le message :
Reading Package Lists... Building Dependency Tree... Correcting dependencies... Done The following extra packages will be installed: libc6 zlib1g The following NEW packages will be installed: libc6 zlib1g 0 packages upgraded, 2 newly installed, 0 to remove and 0 not upgraded. 2 packages not fully installed or removed. Need to get 0B/3427kB of archives. After unpacking 13.2MB will be used. Do you want to continue? [Y/n]...........(donc Y) (Reading database ... 116 files and directories currently installed.) Unpacking libc6 (from .../libc6_2.2.5-11.5_i386.deb) ... dpkg not recorded as installed, cannot check for epoch support ! Unpacking zlib1g (from .../zlib1g_1%3a1.1.4-1.0woody0_i386.deb) ... dpkg not recorded as installed, cannot check for epoch support !
You must upgrade dpkg before installing this package.
Ensuite je tourne en rond impossible d'upgrader dpkg (message apt-get -f install............)
Si quelqu'un a une idée, merci.
lo,
je ne connais pas debian, mais j'ai entendu dire qu'il fallait parfois relancer plusieurs fois de suite le dist-upgrade ...
(sinon essaie aussi sur linux.debian.user.french)
Vincent
Vincent wrote:
Bonjour,
Voici mon problème apres tentative de mise à jour debian 3
apt-get update --> fonctionnement correct puis apt-get dist-upgrade --> et là problème Voici le message :
Reading Package Lists... Building Dependency Tree... You might want to run `apt-get -f install' to correct these. Sorry, but the following packages have unmet dependencies: libncurses5: Depends: libc6 (>= 2.2.4-4) but it is not installed lynx: Depends: libc6 (>= 2.2.4-4) but it is not installed Depends: zlib1g (>= 1:1.1.4) but it is not installed
Donc , comme il me dit.. apt-get -f install --> et là problème Voici le message :
Reading Package Lists... Building Dependency Tree... Correcting dependencies... Done The following extra packages will be installed: libc6 zlib1g The following NEW packages will be installed: libc6 zlib1g 0 packages upgraded, 2 newly installed, 0 to remove and 0 not upgraded. 2 packages not fully installed or removed. Need to get 0B/3427kB of archives. After unpacking 13.2MB will be used. Do you want to continue? [Y/n]...........(donc Y) (Reading database ... 116 files and directories currently installed.) Unpacking libc6 (from .../libc6_2.2.5-11.5_i386.deb) ... dpkg not recorded as installed, cannot check for epoch support ! Unpacking zlib1g (from .../zlib1g_1%3a1.1.4-1.0woody0_i386.deb) ... dpkg not recorded as installed, cannot check for epoch support !
You must upgrade dpkg before installing this package.
Ensuite je tourne en rond impossible d'upgrader dpkg (message apt-get -f install............)
Si quelqu'un a une idée, merci.
lo,
je ne connais pas debian, mais j'ai entendu dire qu'il fallait parfois relancer plusieurs fois de suite le dist-upgrade ... idem
(sinon essaie aussi sur linux.debian.user.french)
Merci je vais poster de suite
Vincent wrote:
Bonjour,
Voici mon problème apres tentative de mise à jour debian 3
apt-get update --> fonctionnement correct
puis
apt-get dist-upgrade --> et là problème Voici le message :
Reading Package Lists...
Building Dependency Tree...
You might want to run `apt-get -f install' to correct these.
Sorry, but the following packages have unmet dependencies:
libncurses5: Depends: libc6 (>= 2.2.4-4) but it is not installed
lynx: Depends: libc6 (>= 2.2.4-4) but it is not installed
Depends: zlib1g (>= 1:1.1.4) but it is not installed
Donc , comme il me dit..
apt-get -f install --> et là problème Voici le message :
Reading Package Lists...
Building Dependency Tree...
Correcting dependencies... Done
The following extra packages will be installed:
libc6 zlib1g
The following NEW packages will be installed:
libc6 zlib1g
0 packages upgraded, 2 newly installed, 0 to remove and 0 not upgraded.
2 packages not fully installed or removed.
Need to get 0B/3427kB of archives. After unpacking 13.2MB will be used.
Do you want to continue? [Y/n]...........(donc Y)
(Reading database ... 116 files and directories currently installed.)
Unpacking libc6 (from .../libc6_2.2.5-11.5_i386.deb) ...
dpkg not recorded as installed, cannot check for epoch support !
Unpacking zlib1g (from .../zlib1g_1%3a1.1.4-1.0woody0_i386.deb) ...
dpkg not recorded as installed, cannot check for epoch support !
You must upgrade dpkg before installing this package.
Ensuite je tourne en rond impossible d'upgrader dpkg (message apt-get
-f install............)
Si quelqu'un a une idée, merci.
lo,
je ne connais pas debian, mais j'ai entendu dire qu'il fallait parfois
relancer plusieurs fois de suite le dist-upgrade ...
idem
Voici mon problème apres tentative de mise à jour debian 3
apt-get update --> fonctionnement correct puis apt-get dist-upgrade --> et là problème Voici le message :
Reading Package Lists... Building Dependency Tree... You might want to run `apt-get -f install' to correct these. Sorry, but the following packages have unmet dependencies: libncurses5: Depends: libc6 (>= 2.2.4-4) but it is not installed lynx: Depends: libc6 (>= 2.2.4-4) but it is not installed Depends: zlib1g (>= 1:1.1.4) but it is not installed
Donc , comme il me dit.. apt-get -f install --> et là problème Voici le message :
Reading Package Lists... Building Dependency Tree... Correcting dependencies... Done The following extra packages will be installed: libc6 zlib1g The following NEW packages will be installed: libc6 zlib1g 0 packages upgraded, 2 newly installed, 0 to remove and 0 not upgraded. 2 packages not fully installed or removed. Need to get 0B/3427kB of archives. After unpacking 13.2MB will be used. Do you want to continue? [Y/n]...........(donc Y) (Reading database ... 116 files and directories currently installed.) Unpacking libc6 (from .../libc6_2.2.5-11.5_i386.deb) ... dpkg not recorded as installed, cannot check for epoch support ! Unpacking zlib1g (from .../zlib1g_1%3a1.1.4-1.0woody0_i386.deb) ... dpkg not recorded as installed, cannot check for epoch support !
You must upgrade dpkg before installing this package.
Ensuite je tourne en rond impossible d'upgrader dpkg (message apt-get -f install............)
Si quelqu'un a une idée, merci.
lo,
je ne connais pas debian, mais j'ai entendu dire qu'il fallait parfois relancer plusieurs fois de suite le dist-upgrade ... idem
(sinon essaie aussi sur linux.debian.user.french)
Merci je vais poster de suite
drfazor
On Sun, 05 Sep 2004 22:06:17 +0200, Rakotomandimby Mihamina wrote:
dist-upgrade sert a passer de stable -> testing , testing -> unstable , ou directement stable -> unstable .
pour mettre a jour de stable a stable, c'est 'upgrade'.
en plus du NG sur debian, tu peux aussi t'abonner a la ML debian.
effectivement, apt-get dist-upgrade, c'est pas tout mal pour passer d'une release a une autre, mais tout les progs ne sont pas forcement upgradé.... pour une upgrade totale, faire: <editer sources.list> apt-get update apt-get dist-upgrade apt-get upgrade
Cela dit, pour tout faire sans risque : utiliser aptitude semble etre la solution de reference
-- Using Opera's revolutionary e-mail client: http://www.opera.com/m2/
dist-upgrade sert a passer de stable -> testing , testing -> unstable ,
ou directement stable -> unstable .
pour mettre a jour de stable a stable, c'est 'upgrade'.
en plus du NG sur debian, tu peux aussi t'abonner a la ML debian.
effectivement, apt-get dist-upgrade, c'est pas tout mal pour passer d'une
release a une autre, mais tout les progs ne sont pas forcement upgradé....
pour une upgrade totale, faire:
<editer sources.list>
apt-get update
apt-get dist-upgrade
apt-get upgrade
Cela dit, pour tout faire sans risque : utiliser aptitude semble etre la
solution de reference
--
Using Opera's revolutionary e-mail client: http://www.opera.com/m2/
On Sun, 05 Sep 2004 22:06:17 +0200, Rakotomandimby Mihamina wrote:
dist-upgrade sert a passer de stable -> testing , testing -> unstable , ou directement stable -> unstable .
pour mettre a jour de stable a stable, c'est 'upgrade'.
en plus du NG sur debian, tu peux aussi t'abonner a la ML debian.
effectivement, apt-get dist-upgrade, c'est pas tout mal pour passer d'une release a une autre, mais tout les progs ne sont pas forcement upgradé.... pour une upgrade totale, faire: <editer sources.list> apt-get update apt-get dist-upgrade apt-get upgrade
Cela dit, pour tout faire sans risque : utiliser aptitude semble etre la solution de reference
-- Using Opera's revolutionary e-mail client: http://www.opera.com/m2/
Rakotomandimby Mihamina
dist-upgrade sert a passer de stable -> testing , testing -> unstable , ou directement stable -> unstable .
pour mettre a jour de stable a stable, c'est 'upgrade'.
en plus du NG sur debian, tu peux aussi t'abonner a la ML debian. -- RKTMB - http://www.rktmb.org/Members/mihamina Tél: + 33 2 38 76 43 65 (France) Membre d'un L.U.G. à Orléans (Université)
dist-upgrade sert a passer de stable -> testing , testing -> unstable ,
ou directement stable -> unstable .
pour mettre a jour de stable a stable, c'est 'upgrade'.
en plus du NG sur debian, tu peux aussi t'abonner a la ML debian.
--
RKTMB - http://www.rktmb.org/Members/mihamina
Tél: + 33 2 38 76 43 65 (France)
Membre d'un L.U.G. à Orléans (Université)
dist-upgrade sert a passer de stable -> testing , testing -> unstable , ou directement stable -> unstable .
pour mettre a jour de stable a stable, c'est 'upgrade'.
en plus du NG sur debian, tu peux aussi t'abonner a la ML debian. -- RKTMB - http://www.rktmb.org/Members/mihamina Tél: + 33 2 38 76 43 65 (France) Membre d'un L.U.G. à Orléans (Université)
