and sorry for writing in English, but my French is rather rusty to
non-existent :)
My neighbours would like to receive France 2, 3, 5 and Ô from 5°W on
11,591 GHz V. Dish is aligned correctly as we do get theses channels
using a separate receiver.
However, their Sony TV KDL-37V5800 only displays "Channel not
available". It does receive loads of (I'd say all) other channels from
this satellite, just not these.
Any idea what might be wrong, is there some speciality about these
channels that the TV might have problems with?
Cette action est irreversible, confirmez la suppression du commentaire ?
Signaler le commentaire
Veuillez sélectionner un problème
Nudité
Violence
Harcèlement
Fraude
Vente illégale
Discours haineux
Terrorisme
Autre
NOSPAM
"Johannes Kleese" a écrit dans le message de groupe de discussion : 4d73484f$0$6992$
Bonjour,
and sorry for writing in English, but my French is rather rusty to non-existent :)
My neighbours would like to receive France 2, 3, 5 and Ô from 5°W on 11,591 GHz V. Dish is aligned correctly as we do get theses channels using a separate receiver.
However, their Sony TV KDL-37V5800 only displays "Channel not available". It does receive loads of (I'd say all) other channels from this satellite, just not these.
Any idea what might be wrong, is there some speciality about these channels that the TV might have problems with?
Merci, Johannes
Hi,
your dish alignement might not be as good as you expect, or the satellite transponder range doesn't fit...where are you located: UK ? what size is your dish? having the other receiver getting those channels doesn't mean really, as sensitivy on both terminals is different for sure there is another channel 'LCP - La Chaine Parlementaire': do you have the same issue? what about TMC on 11555.00 V ?
cheers, Olivier
"Johannes Kleese" a écrit dans le message de groupe de discussion :
4d73484f$0$6992$9b4e6d93@newsspool4.arcor-online.net...
Bonjour,
and sorry for writing in English, but my French is rather rusty to
non-existent :)
My neighbours would like to receive France 2, 3, 5 and Ô from 5°W on
11,591 GHz V. Dish is aligned correctly as we do get theses channels
using a separate receiver.
However, their Sony TV KDL-37V5800 only displays "Channel not
available". It does receive loads of (I'd say all) other channels from
this satellite, just not these.
Any idea what might be wrong, is there some speciality about these
channels that the TV might have problems with?
Merci, Johannes
Hi,
your dish alignement might not be as good as you expect, or the satellite
transponder range doesn't fit...where are you located: UK ?
what size is your dish?
having the other receiver getting those channels doesn't mean really, as
sensitivy on both terminals is different for sure
there is another channel 'LCP - La Chaine Parlementaire': do you have the
same issue?
what about TMC on 11555.00 V ?
"Johannes Kleese" a écrit dans le message de groupe de discussion : 4d73484f$0$6992$
Bonjour,
and sorry for writing in English, but my French is rather rusty to non-existent :)
My neighbours would like to receive France 2, 3, 5 and Ô from 5°W on 11,591 GHz V. Dish is aligned correctly as we do get theses channels using a separate receiver.
However, their Sony TV KDL-37V5800 only displays "Channel not available". It does receive loads of (I'd say all) other channels from this satellite, just not these.
Any idea what might be wrong, is there some speciality about these channels that the TV might have problems with?
Merci, Johannes
Hi,
your dish alignement might not be as good as you expect, or the satellite transponder range doesn't fit...where are you located: UK ? what size is your dish? having the other receiver getting those channels doesn't mean really, as sensitivy on both terminals is different for sure there is another channel 'LCP - La Chaine Parlementaire': do you have the same issue? what about TMC on 11555.00 V ?
cheers, Olivier
Johannes Kleese
Hi,
My neighbours would like to receive France 2, 3, 5 and Ô from 5°W on 11,591 GHz V. Dish is aligned correctly as we do get theses channels using a separate receiver.
However, their Sony TV KDL-37V5800 only displays "Channel not available". It does receive loads of (I'd say all) other channels from this satellite, just not these.
your dish alignement might not be as good as you expect, or the satellite transponder range doesn't fit...where are you located: UK ? what size is your dish? having the other receiver getting those channels doesn't mean really, as sensitivy on both terminals is different for sure
we're just north of Hamburg, Germany, using a cheap 60cm dish. I didn't mention that the TV shows excellent signal strength and quality on that transponder (and, unfortunatly, that's the only "meter" I have at hands). However, your reply got me suspecting that the signal might be too strong, so today I tried to turn the dish slightly in order to get a weaker or at least different signal level.
Still no success on France 2 etc, plus the scanning of other single transponders seemed to return weird results, with channels displayed on frequencies where they shouldn't be. Most likely my fault, I am certainly not understanding the concept Sony's designers had in mind with that #§%$! user interface …
After that, I promised I won't ever buy a Sony TV, started a final attempt with a full scan of only the free channels (yesterday, I accidentally had "all channels") - et voilà, some 15 minutes later, France 2, 3, 5, Ô and LCP.
Left it that way, enough is enough :]
Thanks for your input!
Hi,
My neighbours would like to receive France 2, 3, 5 and Ô from 5°W on
11,591 GHz V. Dish is aligned correctly as we do get theses channels
using a separate receiver.
However, their Sony TV KDL-37V5800 only displays "Channel not
available". It does receive loads of (I'd say all) other channels from
this satellite, just not these.
your dish alignement might not be as good as you expect, or the
satellite transponder range doesn't fit...where are you located: UK ?
what size is your dish?
having the other receiver getting those channels doesn't mean really, as
sensitivy on both terminals is different for sure
we're just north of Hamburg, Germany, using a cheap 60cm dish. I didn't
mention that the TV shows excellent signal strength and quality on that
transponder (and, unfortunatly, that's the only "meter" I have at
hands). However, your reply got me suspecting that the signal might be
too strong, so today I tried to turn the dish slightly in order to get a
weaker or at least different signal level.
Still no success on France 2 etc, plus the scanning of other single
transponders seemed to return weird results, with channels displayed on
frequencies where they shouldn't be. Most likely my fault, I am
certainly not understanding the concept Sony's designers had in mind
with that #§%$! user interface …
After that, I promised I won't ever buy a Sony TV, started a final
attempt with a full scan of only the free channels (yesterday, I
accidentally had "all channels") - et voilà, some 15 minutes later,
France 2, 3, 5, Ô and LCP.
My neighbours would like to receive France 2, 3, 5 and Ô from 5°W on 11,591 GHz V. Dish is aligned correctly as we do get theses channels using a separate receiver.
However, their Sony TV KDL-37V5800 only displays "Channel not available". It does receive loads of (I'd say all) other channels from this satellite, just not these.
your dish alignement might not be as good as you expect, or the satellite transponder range doesn't fit...where are you located: UK ? what size is your dish? having the other receiver getting those channels doesn't mean really, as sensitivy on both terminals is different for sure
we're just north of Hamburg, Germany, using a cheap 60cm dish. I didn't mention that the TV shows excellent signal strength and quality on that transponder (and, unfortunatly, that's the only "meter" I have at hands). However, your reply got me suspecting that the signal might be too strong, so today I tried to turn the dish slightly in order to get a weaker or at least different signal level.
Still no success on France 2 etc, plus the scanning of other single transponders seemed to return weird results, with channels displayed on frequencies where they shouldn't be. Most likely my fault, I am certainly not understanding the concept Sony's designers had in mind with that #§%$! user interface …
After that, I promised I won't ever buy a Sony TV, started a final attempt with a full scan of only the free channels (yesterday, I accidentally had "all channels") - et voilà, some 15 minutes later, France 2, 3, 5, Ô and LCP.
