Þroblème webcam philips + mdk9.2

Bonjour a tous.

Bon, comme le titre l'indique j'ai un problème d'utilisation d'une webcam
Philips soit le module ov511 sous une mandrake 9.2.

En clair "marche po", donc si quelqu'un a une idée.....

voici les fichier important pour une plus grande analyse :

- fichier dmesg
usb.c: USB device 2 (vend/prod 0x5a9/0x518) is not claimed by any active
driver.
Linux video capture interface: v1.00
i2c-core.o: i2c core module version 2.8.0 (20030714)
usb.c: registered new driver ov511
ov511_core.c: USB OV518 video device found
ov511_core.c: Device revision 1
ov511_core.c: Compression required with OV518...enabling
ov511_core.c: Device at usb-00:02.2-1 registered to minor 0
ov511_core.c: v2.25 : ov511 USB Camera Driver (V4L2 disabled)
bttv: driver version 0.7.107 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is Silicon Integrated Systems [SiS] 745 Host
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 2) at 00:08.0, irq: 11, latency: 32, mmio: 0xef000000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: BT878(Hauppauge (bt878)) [card=10,insmod option]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
tuner: chip found @ 0xc2
tuner(bttv): type forced to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF,
FR1216MF)) [insmod]
bttv0: Hauppauge eeprom: model=38106, tuner=Philips FI1216MF MK2 (3),
radio=no
bttv0: using tuner=3
tuner: type already set (3)
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54
(PV951),ta8874z
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: registered device video1
bttv0: registered device vbi0

- fichier messages
Nov 13 00:17:47 jupiter kernel: ov511_core.c: No sensor is detected yet

- lsmod
tvaudio 16008 0 (autoclean) (unused)
bttv 99648 0
tuner 11688 1 (autoclean)
i2c-algo-bit 8552 0 [bttv]
soundcore 6340 0 [snd bttv]
ov511 92032 0
i2c-core 20484 0 [tvaudio bttv tuner i2c-algo-bit ov511]
v4l2-common 4032 0 [ov511]
videodev 7936 3 [bttv ov511]
usb-ohci 21080 0 (unused)
usbcore 74988 1 [ov511 usb-ohci]

- modules.conf
# Controleur USB
probeall usb-interface usb-ohci
# Camera Philips
#alias char-major-81-0 ov511
alias /dev/video0 ov511
# Carte TV
#alias char-major-81-1 bttv
alias /dev/video1 bttv
pre-install bttv modprobe -k tuner
options i2c verbose=1 scan=1 i2c_debug=0
options bttv radio=0 card=10 tuner=3 gbuffers=4
options tuner debug=0 type=3

- xawtv -c /dev/video0
can't open /dev/video0: No such device
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/video0: No such device
v4l2: open /dev/video0: No such device
v4l: open /dev/video0: No such device
no video grabber device available

- xawtv -c /dev/video1
This is xawtv-3.88, running on Linux/i686 (2.4.22-21mdk)
Xlib: extension "XFree86-DRI" missing on display ":0.0".

merci d'avance.