Bonjour,
je suis actuellement en alternance. je suis chargé de mettre en place un serveur de supervision.
jai fais l'installation de SHINKEN et tout fonctionne. j'essaie de monitorer un switch mais jai une erreur au niveau de linterface status. ca renvoie ceci:
CRITICAL - Vlan1 is admin down, fault condition is presumed to exist on StackPort1, fault condition is presumed to exist on StackSub-St1-1, fault condition is presumed to exist on StackSub-St1-2, fault condition is presumed to exist on GigabitEthernet1/0/16, fault condition is presumed to exist on GigabitEthernet1/0/17, fault condition is presumed to exist on GigabitEthernet1/0/18, fault condition is presumed to exist on GigabitEthernet1/0/20, fault condition is presumed to exist on GigabitEthernet1/0/21, fault condition is presumed to exist on GigabitEthernet1/0/22, fault condition is presumed to exist on GigabitEthernet1/0/23, fault condition is presumed to exist on GigabitEthernet1/0/24, fault condition is presumed to exist on GigabitEthernet1/0/25, fault condition is presumed to exist on GigabitEthernet1/0/26, fault condition is presumed to exist on GigabitEthernet1/0/27, fault condition is presumed to exist on GigabitEthernet1/0/28, fault condition is presumed to exist on GigabitEthernet1/0/29, fault condition is presumed to exist on GigabitEthernet1/0/30, fault condition is presumed to exist on GigabitEthernet1/0/31, fault condition is presumed to exist on GigabitEthernet1/0/32, fault condition is presumed to exist on GigabitEthernet1/0/33, fault condition is presumed to exist on GigabitEthernet1/0/34, fault condition is presumed to exist on GigabitEthernet1/0/35, fault condition is presumed to exist on GigabitEthernet1/0/36, fault condition is presumed to exist on GigabitEthernet1/0/37, fault condition is presumed to exist on GigabitEthernet1/0/38, fault condition is presumed to exist on GigabitEthernet1/0/39, fault condition is presumed to exist on GigabitEthernet1/0/40, fault condition is presumed to exist on GigabitEthernet1/0/41, fault condition is presumed to exist on GigabitEthernet1/0/42, fault condition is presumed to exist on GigabitEthernet1/0/44, fault condition is presumed to exist on GigabitEthernet1/0/49, fault condition is presumed to exist on GigabitEthernet1/0/50, fault condition is presumed to exist on GigabitEthernet1/0/51, fault condition is presumed to exist on GigabitEthernet1/0/52, FastEthernet0 is admin down, Vlan1 is down/down, Vlan10 is up/up, Port-channel1 is up/up, StackPort1 is down/up, StackSub-St1-1 is down/up, StackSub-St1-2 is down/up, GigabitEthernet1/0/1 is up/up, GigabitEthernet1/0/2 is up/up, GigabitEthernet1/0/3 is up/up, GigabitEthernet1/0/4 is up/up, GigabitEthernet1/0/5 is up/up, GigabitEthernet1/0/6 is up/up, GigabitEthernet1/0/7 is up/up, GigabitEthernet1/0/8 is up/up, GigabitEthernet1/0/9 is up/up, GigabitEthernet1/0/10 is up/up, GigabitEthernet1/0/11 is up/up, GigabitEthernet1/0/12 is up/up, GigabitEthernet1/0/13 is up/up, GigabitEthernet1/0/14 is up/up, GigabitEthernet1/0/15 is up/up, GigabitEthernet1/0/16 is down/up, GigabitEthernet1/0/17 is down/up, GigabitEthernet1/0/18 is down/up, GigabitEthernet1/0/19 is up/up, GigabitEthernet1/0/20 is down/up, GigabitEthernet1/0/21 is down/up, GigabitEthernet1/0/22 is down/up, GigabitEthernet1/0/23 is down/up, GigabitEthernet1/0/24 is down/up, GigabitEthernet1/0/25 is down/up, GigabitEthernet1/0/26 is down/up, GigabitEthernet1/0/27 is down/up, GigabitEthernet1/0/28 is down/up, GigabitEthernet1/0/29 is down/up, GigabitEthernet1/0/30 is down/up, GigabitEthernet1/0/31 is down/up, GigabitEthernet1/0/32 is down/up, GigabitEthernet1/0/33 is down/up, GigabitEthernet1/0/34 is down/up, GigabitEthernet1/0/35 is down/up, GigabitEthernet1/0/36 is down/up, GigabitEthernet1/0/37 is down/up, GigabitEthernet1/0/38 is down/up, GigabitEthernet1/0/39 is down/up, GigabitEthernet1/0/40 is down/up, GigabitEthernet1/0/41 is down/up, GigabitEthernet1/0/42 is down/up, GigabitEthernet1/0/43 is up/up, GigabitEthernet1/0/44 is down/up, GigabitEthernet1/0/45 is up/up, GigabitEthernet1/0/46 is up/up, GigabitEthernet1/0/47 is up/up, GigabitEthernet1/0/48 is up/up, GigabitEthernet1/0/49 is down/up, GigabitEthernet1/0/50 is down/up, GigabitEthernet1/0/51 is down/up, GigabitEthernet1/0/52 is down/up, Null0 is up/up, FastEthernet0 is down/down
Cette action est irreversible, confirmez la suppression du commentaire ?
Signaler le commentaire
Veuillez sélectionner un problème
Nudité
Violence
Harcèlement
Fraude
Vente illégale
Discours haineux
Terrorisme
Autre
Eric Belhomme
Le Mon, 28 Jan 2019 08:36:03 -0600, lassa a écrit :
Bonjour, je suis actuellement en alternance. je suis chargé de mettre en place un serveur de supervision. jai fais l'installation de SHINKEN et tout fonctionne. j'essaie de monitorer un switch mais jai une erreur au niveau de linterface status. ca renvoie ceci: CRITICAL - Vlan1 is admin down, fault condition is
[...]
GigabitEthernet1/0/49 is down/up, GigabitEthernet1/0/50 is down/up, GigabitEthernet1/0/51 is down/up, GigabitEthernet1/0/52 is down/up, Null0 is up/up, FastEthernet0 is down/down merci de bien vouloir m'aider svp
Toi, tu utilises le plugin Nagios check_nwc_health de Consol Labs, avec le mode "interface-health". Dans ce mode, le plugin te retourne un statut "critical" parce que ton switch n'est pas correctement configuré (du moins, pas dans les règles de l'art) car les ports non utilisés (sans cable branché) sont configurés "up" alors qu'ils devraient être "admin down". Solutions: soit configurer le switch pour passer admin down les ports non utilisés, soit lire la documentation de check_nwc_health et au choix utiliser un autre mode, ou filtrer uniquement sur les interfaces à monitorer. -- Rico
Le Mon, 28 Jan 2019 08:36:03 -0600, lassa a écrit :
Bonjour,
je suis actuellement en alternance. je suis chargé de mettre en place un
serveur de supervision.
jai fais l'installation de SHINKEN et tout fonctionne. j'essaie de
monitorer un switch mais jai une erreur au niveau de linterface status.
ca renvoie ceci: CRITICAL - Vlan1 is admin down, fault condition is
[...]
GigabitEthernet1/0/49 is down/up, GigabitEthernet1/0/50 is down/up,
GigabitEthernet1/0/51 is down/up, GigabitEthernet1/0/52 is down/up,
Null0 is up/up, FastEthernet0 is down/down
merci de bien vouloir m'aider svp
Toi, tu utilises le plugin Nagios check_nwc_health de Consol Labs, avec
le mode "interface-health".
Dans ce mode, le plugin te retourne un statut "critical" parce que ton
switch n'est pas correctement configuré (du moins, pas dans les règles de
l'art) car les ports non utilisés (sans cable branché) sont configurés
"up" alors qu'ils devraient être "admin down".
Solutions: soit configurer le switch pour passer admin down les ports non
utilisés, soit lire la documentation de check_nwc_health et au choix
utiliser un autre mode, ou filtrer uniquement sur les interfaces à
monitorer.
Le Mon, 28 Jan 2019 08:36:03 -0600, lassa a écrit :
Bonjour, je suis actuellement en alternance. je suis chargé de mettre en place un serveur de supervision. jai fais l'installation de SHINKEN et tout fonctionne. j'essaie de monitorer un switch mais jai une erreur au niveau de linterface status. ca renvoie ceci: CRITICAL - Vlan1 is admin down, fault condition is
[...]
GigabitEthernet1/0/49 is down/up, GigabitEthernet1/0/50 is down/up, GigabitEthernet1/0/51 is down/up, GigabitEthernet1/0/52 is down/up, Null0 is up/up, FastEthernet0 is down/down merci de bien vouloir m'aider svp
Toi, tu utilises le plugin Nagios check_nwc_health de Consol Labs, avec le mode "interface-health". Dans ce mode, le plugin te retourne un statut "critical" parce que ton switch n'est pas correctement configuré (du moins, pas dans les règles de l'art) car les ports non utilisés (sans cable branché) sont configurés "up" alors qu'ils devraient être "admin down". Solutions: soit configurer le switch pour passer admin down les ports non utilisés, soit lire la documentation de check_nwc_health et au choix utiliser un autre mode, ou filtrer uniquement sur les interfaces à monitorer. -- Rico
smail39
Le lundi 28 Janvier 2019 à 15:36 par lassa :
Bonjour, je suis actuellement en alternance. je suis chargé de mettre en place un serveur de supervision. jai fais l'installation de SHINKEN et tout fonctionne. j'essaie de monitorer un switch mais jai une erreur au niveau de linterface status. ca renvoie ceci: CRITICAL - Vlan1 is admin down, fault condition is presumed to exist on StackPort1, fault condition is presumed to exist on StackSub-St1-1, fault condition is presumed to exist on StackSub-St1-2, fault condition is presumed to exist on GigabitEthernet1/0/16, fault condition is presumed to exist on GigabitEthernet1/0/17, fault condition is presumed to exist on GigabitEthernet1/0/18, fault condition is presumed to exist on GigabitEthernet1/0/20, fault condition is presumed to exist on GigabitEthernet1/0/21, fault condition is presumed to exist on GigabitEthernet1/0/22, fault condition is presumed to exist on GigabitEthernet1/0/23, fault condition is presumed to exist on GigabitEthernet1/0/24, fault condition is presumed to exist on GigabitEthernet1/0/25, fault condition is presumed to exist on GigabitEthernet1/0/26, fault condition is presumed to exist on GigabitEthernet1/0/27, fault condition is presumed to exist on GigabitEthernet1/0/28, fault condition is presumed to exist on GigabitEthernet1/0/29, fault condition is presumed to exist on GigabitEthernet1/0/30, fault condition is presumed to exist on GigabitEthernet1/0/31, fault condition is presumed to exist on GigabitEthernet1/0/32, fault condition is presumed to exist on GigabitEthernet1/0/33, fault condition is presumed to exist on GigabitEthernet1/0/34, fault condition is presumed to exist on GigabitEthernet1/0/35, fault condition is presumed to exist on GigabitEthernet1/0/36, fault condition is presumed to exist on GigabitEthernet1/0/37, fault condition is presumed to exist on GigabitEthernet1/0/38, fault condition is presumed to exist on GigabitEthernet1/0/39, fault condition is presumed to exist on GigabitEthernet1/0/40, fault condition is presumed to exist on GigabitEthernet1/0/41, fault condition is presumed to exist on GigabitEthernet1/0/42, fault condition is presumed to exist on GigabitEthernet1/0/44, fault condition is presumed to exist on GigabitEthernet1/0/49, fault condition is presumed to exist on GigabitEthernet1/0/50, fault condition is presumed to exist on GigabitEthernet1/0/51, fault condition is presumed to exist on GigabitEthernet1/0/52, FastEthernet0 is admin down, Vlan1 is down/down, Vlan10 is up/up, Port-channel1 is up/up, StackPort1 is down/up, StackSub-St1-1 is down/up, StackSub-St1-2 is down/up, GigabitEthernet1/0/1 is up/up, GigabitEthernet1/0/2 is up/up, GigabitEthernet1/0/3 is up/up, GigabitEthernet1/0/4 is up/up, GigabitEthernet1/0/5 is up/up, GigabitEthernet1/0/6 is up/up, GigabitEthernet1/0/7 is up/up, GigabitEthernet1/0/8 is up/up, GigabitEthernet1/0/9 is up/up, GigabitEthernet1/0/10 is up/up, GigabitEthernet1/0/11 is up/up, GigabitEthernet1/0/12 is up/up, GigabitEthernet1/0/13 is up/up, GigabitEthernet1/0/14 is up/up, GigabitEthernet1/0/15 is up/up, GigabitEthernet1/0/16 is down/up, GigabitEthernet1/0/17 is down/up, GigabitEthernet1/0/18 is down/up, GigabitEthernet1/0/19 is up/up, GigabitEthernet1/0/20 is down/up, GigabitEthernet1/0/21 is down/up, GigabitEthernet1/0/22 is down/up, GigabitEthernet1/0/23 is down/up, GigabitEthernet1/0/24 is down/up, GigabitEthernet1/0/25 is down/up, GigabitEthernet1/0/26 is down/up, GigabitEthernet1/0/27 is down/up, GigabitEthernet1/0/28 is down/up, GigabitEthernet1/0/29 is down/up, GigabitEthernet1/0/30 is down/up, GigabitEthernet1/0/31 is down/up, GigabitEthernet1/0/32 is down/up, GigabitEthernet1/0/33 is down/up, GigabitEthernet1/0/34 is down/up, GigabitEthernet1/0/35 is down/up, GigabitEthernet1/0/36 is down/up, GigabitEthernet1/0/37 is down/up, GigabitEthernet1/0/38 is down/up, GigabitEthernet1/0/39 is down/up, GigabitEthernet1/0/40 is down/up, GigabitEthernet1/0/41 is down/up, GigabitEthernet1/0/42 is down/up, GigabitEthernet1/0/43 is up/up, GigabitEthernet1/0/44 is down/up, GigabitEthernet1/0/45 is up/up, GigabitEthernet1/0/46 is up/up, GigabitEthernet1/0/47 is up/up, GigabitEthernet1/0/48 is up/up, GigabitEthernet1/0/49 is down/up, GigabitEthernet1/0/50 is down/up, GigabitEthernet1/0/51 is down/up, GigabitEthernet1/0/52 is down/up, Null0 is up/up, FastEthernet0 is down/down merci de bien vouloir m'aider svp
Bonjour Lassa, Moi aussi j'ai eu le même problème svp est ce que vous avez trouvé la solution. merci
Le lundi 28 Janvier 2019 à 15:36 par lassa :
> Bonjour,
> je suis actuellement en alternance. je suis chargé de mettre en place un
> serveur de supervision.
> jai fais l'installation de SHINKEN et tout fonctionne. j'essaie de monitorer un
> switch mais jai une erreur au niveau de linterface status. ca renvoie ceci:
> CRITICAL - Vlan1 is admin down, fault condition is presumed to exist on
> StackPort1, fault condition is presumed to exist on StackSub-St1-1, fault
> condition is presumed to exist on StackSub-St1-2, fault condition is presumed
> to exist on GigabitEthernet1/0/16, fault condition is presumed to exist on
> GigabitEthernet1/0/17, fault condition is presumed to exist on
> GigabitEthernet1/0/18, fault condition is presumed to exist on
> GigabitEthernet1/0/20, fault condition is presumed to exist on
> GigabitEthernet1/0/21, fault condition is presumed to exist on
> GigabitEthernet1/0/22, fault condition is presumed to exist on
> GigabitEthernet1/0/23, fault condition is presumed to exist on
> GigabitEthernet1/0/24, fault condition is presumed to exist on
> GigabitEthernet1/0/25, fault condition is presumed to exist on
> GigabitEthernet1/0/26, fault condition is presumed to exist on
> GigabitEthernet1/0/27, fault condition is presumed to exist on
> GigabitEthernet1/0/28, fault condition is presumed to exist on
> GigabitEthernet1/0/29, fault condition is presumed to exist on
> GigabitEthernet1/0/30, fault condition is presumed to exist on
> GigabitEthernet1/0/31, fault condition is presumed to exist on
> GigabitEthernet1/0/32, fault condition is presumed to exist on
> GigabitEthernet1/0/33, fault condition is presumed to exist on
> GigabitEthernet1/0/34, fault condition is presumed to exist on
> GigabitEthernet1/0/35, fault condition is presumed to exist on
> GigabitEthernet1/0/36, fault condition is presumed to exist on
> GigabitEthernet1/0/37, fault condition is presumed to exist on
> GigabitEthernet1/0/38, fault condition is presumed to exist on
> GigabitEthernet1/0/39, fault condition is presumed to exist on
> GigabitEthernet1/0/40, fault condition is presumed to exist on
> GigabitEthernet1/0/41, fault condition is presumed to exist on
> GigabitEthernet1/0/42, fault condition is presumed to exist on
> GigabitEthernet1/0/44, fault condition is presumed to exist on
> GigabitEthernet1/0/49, fault condition is presumed to exist on
> GigabitEthernet1/0/50, fault condition is presumed to exist on
> GigabitEthernet1/0/51, fault condition is presumed to exist on
> GigabitEthernet1/0/52, FastEthernet0 is admin down, Vlan1 is down/down, Vlan10
> is up/up, Port-channel1 is up/up, StackPort1 is down/up, StackSub-St1-1 is
> down/up, StackSub-St1-2 is down/up, GigabitEthernet1/0/1 is up/up,
> GigabitEthernet1/0/2 is up/up, GigabitEthernet1/0/3 is up/up,
> GigabitEthernet1/0/4 is up/up, GigabitEthernet1/0/5 is up/up,
> GigabitEthernet1/0/6 is up/up, GigabitEthernet1/0/7 is up/up,
> GigabitEthernet1/0/8 is up/up, GigabitEthernet1/0/9 is up/up,
> GigabitEthernet1/0/10 is up/up, GigabitEthernet1/0/11 is up/up,
> GigabitEthernet1/0/12 is up/up, GigabitEthernet1/0/13 is up/up,
> GigabitEthernet1/0/14 is up/up, GigabitEthernet1/0/15 is up/up,
> GigabitEthernet1/0/16 is down/up, GigabitEthernet1/0/17 is down/up,
> GigabitEthernet1/0/18 is down/up, GigabitEthernet1/0/19 is up/up,
> GigabitEthernet1/0/20 is down/up, GigabitEthernet1/0/21 is down/up,
> GigabitEthernet1/0/22 is down/up, GigabitEthernet1/0/23 is down/up,
> GigabitEthernet1/0/24 is down/up, GigabitEthernet1/0/25 is down/up,
> GigabitEthernet1/0/26 is down/up, GigabitEthernet1/0/27 is down/up,
> GigabitEthernet1/0/28 is down/up, GigabitEthernet1/0/29 is down/up,
> GigabitEthernet1/0/30 is down/up, GigabitEthernet1/0/31 is down/up,
> GigabitEthernet1/0/32 is down/up, GigabitEthernet1/0/33 is down/up,
> GigabitEthernet1/0/34 is down/up, GigabitEthernet1/0/35 is down/up,
> GigabitEthernet1/0/36 is down/up, GigabitEthernet1/0/37 is down/up,
> GigabitEthernet1/0/38 is down/up, GigabitEthernet1/0/39 is down/up,
> GigabitEthernet1/0/40 is down/up, GigabitEthernet1/0/41 is down/up,
> GigabitEthernet1/0/42 is down/up, GigabitEthernet1/0/43 is up/up,
> GigabitEthernet1/0/44 is down/up, GigabitEthernet1/0/45 is up/up,
> GigabitEthernet1/0/46 is up/up, GigabitEthernet1/0/47 is up/up,
> GigabitEthernet1/0/48 is up/up, GigabitEthernet1/0/49 is down/up,
> GigabitEthernet1/0/50 is down/up, GigabitEthernet1/0/51 is down/up,
> GigabitEthernet1/0/52 is down/up, Null0 is up/up, FastEthernet0 is down/down
>
> merci de bien vouloir m'aider svp
Bonjour Lassa,
Moi aussi j'ai eu le même problème svp est ce que vous avez trouvé la solution.
merci
Bonjour, je suis actuellement en alternance. je suis chargé de mettre en place un serveur de supervision. jai fais l'installation de SHINKEN et tout fonctionne. j'essaie de monitorer un switch mais jai une erreur au niveau de linterface status. ca renvoie ceci: CRITICAL - Vlan1 is admin down, fault condition is presumed to exist on StackPort1, fault condition is presumed to exist on StackSub-St1-1, fault condition is presumed to exist on StackSub-St1-2, fault condition is presumed to exist on GigabitEthernet1/0/16, fault condition is presumed to exist on GigabitEthernet1/0/17, fault condition is presumed to exist on GigabitEthernet1/0/18, fault condition is presumed to exist on GigabitEthernet1/0/20, fault condition is presumed to exist on GigabitEthernet1/0/21, fault condition is presumed to exist on GigabitEthernet1/0/22, fault condition is presumed to exist on GigabitEthernet1/0/23, fault condition is presumed to exist on GigabitEthernet1/0/24, fault condition is presumed to exist on GigabitEthernet1/0/25, fault condition is presumed to exist on GigabitEthernet1/0/26, fault condition is presumed to exist on GigabitEthernet1/0/27, fault condition is presumed to exist on GigabitEthernet1/0/28, fault condition is presumed to exist on GigabitEthernet1/0/29, fault condition is presumed to exist on GigabitEthernet1/0/30, fault condition is presumed to exist on GigabitEthernet1/0/31, fault condition is presumed to exist on GigabitEthernet1/0/32, fault condition is presumed to exist on GigabitEthernet1/0/33, fault condition is presumed to exist on GigabitEthernet1/0/34, fault condition is presumed to exist on GigabitEthernet1/0/35, fault condition is presumed to exist on GigabitEthernet1/0/36, fault condition is presumed to exist on GigabitEthernet1/0/37, fault condition is presumed to exist on GigabitEthernet1/0/38, fault condition is presumed to exist on GigabitEthernet1/0/39, fault condition is presumed to exist on GigabitEthernet1/0/40, fault condition is presumed to exist on GigabitEthernet1/0/41, fault condition is presumed to exist on GigabitEthernet1/0/42, fault condition is presumed to exist on GigabitEthernet1/0/44, fault condition is presumed to exist on GigabitEthernet1/0/49, fault condition is presumed to exist on GigabitEthernet1/0/50, fault condition is presumed to exist on GigabitEthernet1/0/51, fault condition is presumed to exist on GigabitEthernet1/0/52, FastEthernet0 is admin down, Vlan1 is down/down, Vlan10 is up/up, Port-channel1 is up/up, StackPort1 is down/up, StackSub-St1-1 is down/up, StackSub-St1-2 is down/up, GigabitEthernet1/0/1 is up/up, GigabitEthernet1/0/2 is up/up, GigabitEthernet1/0/3 is up/up, GigabitEthernet1/0/4 is up/up, GigabitEthernet1/0/5 is up/up, GigabitEthernet1/0/6 is up/up, GigabitEthernet1/0/7 is up/up, GigabitEthernet1/0/8 is up/up, GigabitEthernet1/0/9 is up/up, GigabitEthernet1/0/10 is up/up, GigabitEthernet1/0/11 is up/up, GigabitEthernet1/0/12 is up/up, GigabitEthernet1/0/13 is up/up, GigabitEthernet1/0/14 is up/up, GigabitEthernet1/0/15 is up/up, GigabitEthernet1/0/16 is down/up, GigabitEthernet1/0/17 is down/up, GigabitEthernet1/0/18 is down/up, GigabitEthernet1/0/19 is up/up, GigabitEthernet1/0/20 is down/up, GigabitEthernet1/0/21 is down/up, GigabitEthernet1/0/22 is down/up, GigabitEthernet1/0/23 is down/up, GigabitEthernet1/0/24 is down/up, GigabitEthernet1/0/25 is down/up, GigabitEthernet1/0/26 is down/up, GigabitEthernet1/0/27 is down/up, GigabitEthernet1/0/28 is down/up, GigabitEthernet1/0/29 is down/up, GigabitEthernet1/0/30 is down/up, GigabitEthernet1/0/31 is down/up, GigabitEthernet1/0/32 is down/up, GigabitEthernet1/0/33 is down/up, GigabitEthernet1/0/34 is down/up, GigabitEthernet1/0/35 is down/up, GigabitEthernet1/0/36 is down/up, GigabitEthernet1/0/37 is down/up, GigabitEthernet1/0/38 is down/up, GigabitEthernet1/0/39 is down/up, GigabitEthernet1/0/40 is down/up, GigabitEthernet1/0/41 is down/up, GigabitEthernet1/0/42 is down/up, GigabitEthernet1/0/43 is up/up, GigabitEthernet1/0/44 is down/up, GigabitEthernet1/0/45 is up/up, GigabitEthernet1/0/46 is up/up, GigabitEthernet1/0/47 is up/up, GigabitEthernet1/0/48 is up/up, GigabitEthernet1/0/49 is down/up, GigabitEthernet1/0/50 is down/up, GigabitEthernet1/0/51 is down/up, GigabitEthernet1/0/52 is down/up, Null0 is up/up, FastEthernet0 is down/down merci de bien vouloir m'aider svp
Bonjour Lassa, Moi aussi j'ai eu le même problème svp est ce que vous avez trouvé la solution. merci
