[VDS][RP] COBALT SUN RaQ4i

Le
paul.claude888
SUN COBALT RaQ 4i
512Mo de RAM, DD 30GO, CPU K6-III 450Mhz, 2 Ethernet 10/100Mbits/s, 2
ports séries asynchrones.
avec connecteur SCSI externe.
1 disque dur Seagate de 30Go
(modèle ST330621A "U series 5" firmware 3.39 date code: 0137 Site code: SZ)
1 emplacement libre pour une carte PCI.
Afficheur LCD en face avant.
prise de sécurité type Kensington à l'arriére (anti-vol).
S/N 4H06KM1240052
M/N R46 H30 GIE
pas de kit de montage 19 pouces.
CDROM de réinstallation fourni. (il est aussi téléchargeable sur le site
web de SUN).

peut être transformée en serveur RAID 1 (mirroring) en ajoutant un
deuxiéme disque dur. Posséde le 2éme berceau à disque dur déjà installé
dans le boitier.


Liste des LED en face avant:
Tx/Rx, Link, COL, 100M, DISK, WEB

Free:
total used free shared buffers
cached
Mem: 517112 58992 458120 104592 8524
24696
-/+ buffers/cache: 25772 491340
Swap: 131532 0 131532


cat /proc/cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 5
model : 13
model name : AMD-K6(tm)-III Processor
stepping : 4
cpu MHz : 448.219
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 sep pge mmx 30 3dnow
bogomips : 894.57
temperature : 29.5
system type : RaQ3/4

cat /proc/version
Linux version 2.2.16C32_III (root@sun.cobalt.com) (gcc version egcs-2.91.66
19990314/Linux (egcs-1.1.2 release)) #1 Fri Nov 9 21:54:54 PST 2001

cat /proc/pci:
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Acer Labs M1541 Aladdin V (rev 4).
Slow devsel. Master Capable. Latencyd.
Bus 0, device 1, function 0:
PCI bridge: Acer Labs M5243 AGP (rev 4).
Slow devsel. Master Capable. Latency2. Min Gnt5.
Bus 0, device 2, function 0:
USB Controller: Acer Labs M5237 USB (rev 3).
Medium devsel. Fast back-to-back capable. IRQ 6. Master
Capable. Latency2.
Max Lat.
Non-prefetchable 32 bit memory at 0xa0000000 [0xa0000000].
Bus 0, device 3, function 0:
Non-VGA device: Acer Labs M7101 PMU (rev 0).
Medium devsel. Fast back-to-back capable.
I/O at 0x6000 [0x6001].
I/O at 0x3a80 [0x3a81].
Bus 0, device 7, function 0:
ISA bridge: Acer Labs M1533 Aladdin IV (rev 195).
Medium devsel. Master Capable. No bursts.
Bus 0, device 14, function 0:
SCSI storage controller: NCR 53c875 (rev 4).
Medium devsel. IRQ 12. Master Capable. Latency2. Min
Gnt.Max Latd.
I/O at 0x6100 [0x6101].
Non-prefetchable 32 bit memory at 0xa0001000 [0xa0001000].
Non-prefetchable 32 bit memory at 0xa0002000 [0xa0002000].
Bus 0, device 15, function 0:
IDE interface: Acer Labs M5229 TXpro (rev 193).
Medium devsel. Fast back-to-back capable. IRQ 14. Master
Capable. Latency2.
Min Gnt=2.Max Lat=4.
I/O at 0x1f0 [0x1f1].
I/O at 0x3f4 [0x3f5].
I/O at 0x170 [0x171].
I/O at 0x374 [0x375].
I/O at 0xf000 [0xf001].
Bus 0, device 16, function 0:
Ethernet controller: Intel 82559ER (rev 9).
Medium devsel. Fast back-to-back capable. IRQ 11. Master
Capable. Latency2.
Min Gnt=8.Max LatV.
Non-prefetchable 32 bit memory at 0xa0003000 [0xa0003000].
I/O at 0x6200 [0x6201].
Non-prefetchable 32 bit memory at 0xa0020000 [0xa0020000].
Bus 0, device 18, function 0:
Ethernet controller: Intel 82559ER (rev 9).
Medium devsel. Fast back-to-back capable. IRQ 10. Master
Capable. Latency2.
Min Gnt=8.Max LatV.
Non-prefetchable 32 bit memory at 0xa0040000 [0xa0040000].
I/O at 0x6240 [0x6241].
Non-prefetchable 32 bit memory at 0xa0060000 [0xa0060000].

hdparm:
[root /]# hdparm -iv /dev/hda

/dev/hda:
multcount = 16 (on)
I/O support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
nowerr = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 58168/16/63, sectors = 58633344, start = 0

Model=ST330621A, FwRev=3.39, SerialNonE095XB
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS383/16/63, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=0(?), BuffSize24kB, MaxMultSect, MultSect
DblWordIO=no, OldPIO=2, DMA=yes, OldDMA=2
CurCHS383/16/63, CurSects=-66060037, LBA=yes, LBAsectsX633344
tDMA={min:120,rec:120}, DMA modes: mword0 mword1 mword2
IORDY=on/off, tPIO={min:240,w/IORDY:120}, PIO modes: mode3 mode4
UDMA modes: mode0 mode1 *mode2 mode3 mode4 mode5

photos intérieur et extérieur sur demande.
avec facture.
Vos réponses
Gagnez chaque mois un abonnement Premium avec GNT : Inscrivez-vous !
Trier par : date / pertinence
Alainp
Le #1106954
300 euros ?
a+


news:408f931e$0$22860$
SUN COBALT RaQ 4i
512Mo de RAM, DD 30GO, CPU K6-III 450Mhz, 2 Ethernet 10/100Mbits/s, 2
ports séries asynchrones.
avec connecteur SCSI externe.
1 disque dur Seagate de 30Go
(modèle ST330621A "U series 5" firmware 3.39 date code: 0137 Site code:
SZ)

1 emplacement libre pour une carte PCI.
Afficheur LCD en face avant.
prise de sécurité type Kensington à l'arriére (anti-vol).
S/N 4H06KM1240052
M/N R46 H30 GIE
pas de kit de montage 19 pouces.
CDROM de réinstallation fourni. (il est aussi téléchargeable sur le site
web de SUN).

peut être transformée en serveur RAID 1 (mirroring) en ajoutant un
deuxiéme disque dur. Posséde le 2éme berceau à disque dur déjà installé
dans le boitier.


Liste des LED en face avant:
Tx/Rx, Link, COL, 100M, DISK, WEB

Free:
total used free shared buffers
cached
Mem: 517112 58992 458120 104592 8524
24696
-/+ buffers/cache: 25772 491340
Swap: 131532 0 131532


cat /proc/cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 5
model : 13
model name : AMD-K6(tm)-III Processor
stepping : 4
cpu MHz : 448.219
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 sep pge mmx 30 3dnow
bogomips : 894.57
temperature : 29.5
system type : RaQ3/4

cat /proc/version
Linux version 2.2.16C32_III () (gcc version
egcs-2.91.66

19990314/Linux (egcs-1.1.2 release)) #1 Fri Nov 9 21:54:54 PST 2001

cat /proc/pci:
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Acer Labs M1541 Aladdin V (rev 4).
Slow devsel. Master Capable. Latencyd.
Bus 0, device 1, function 0:
PCI bridge: Acer Labs M5243 AGP (rev 4).
Slow devsel. Master Capable. Latency2. Min Gnt5.
Bus 0, device 2, function 0:
USB Controller: Acer Labs M5237 USB (rev 3).
Medium devsel. Fast back-to-back capable. IRQ 6. Master
Capable. Latency2.
Max Lat€.
Non-prefetchable 32 bit memory at 0xa0000000 [0xa0000000].
Bus 0, device 3, function 0:
Non-VGA device: Acer Labs M7101 PMU (rev 0).
Medium devsel. Fast back-to-back capable.
I/O at 0x6000 [0x6001].
I/O at 0x3a80 [0x3a81].
Bus 0, device 7, function 0:
ISA bridge: Acer Labs M1533 Aladdin IV (rev 195).
Medium devsel. Master Capable. No bursts.
Bus 0, device 14, function 0:
SCSI storage controller: NCR 53c875 (rev 4).
Medium devsel. IRQ 12. Master Capable. Latency2. Min
Gnt.Max Latd.
I/O at 0x6100 [0x6101].
Non-prefetchable 32 bit memory at 0xa0001000 [0xa0001000].
Non-prefetchable 32 bit memory at 0xa0002000 [0xa0002000].
Bus 0, device 15, function 0:
IDE interface: Acer Labs M5229 TXpro (rev 193).
Medium devsel. Fast back-to-back capable. IRQ 14. Master
Capable. Latency2.
Min Gnt=2.Max Lat=4.
I/O at 0x1f0 [0x1f1].
I/O at 0x3f4 [0x3f5].
I/O at 0x170 [0x171].
I/O at 0x374 [0x375].
I/O at 0xf000 [0xf001].
Bus 0, device 16, function 0:
Ethernet controller: Intel 82559ER (rev 9).
Medium devsel. Fast back-to-back capable. IRQ 11. Master
Capable. Latency2.
Min Gnt=8.Max LatV.
Non-prefetchable 32 bit memory at 0xa0003000 [0xa0003000].
I/O at 0x6200 [0x6201].
Non-prefetchable 32 bit memory at 0xa0020000 [0xa0020000].
Bus 0, device 18, function 0:
Ethernet controller: Intel 82559ER (rev 9).
Medium devsel. Fast back-to-back capable. IRQ 10. Master
Capable. Latency2.
Min Gnt=8.Max LatV.
Non-prefetchable 32 bit memory at 0xa0040000 [0xa0040000].
I/O at 0x6240 [0x6241].
Non-prefetchable 32 bit memory at 0xa0060000 [0xa0060000].

hdparm:
[root /]# hdparm -iv /dev/hda

/dev/hda:
multcount = 16 (on)
I/O support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
nowerr = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 58168/16/63, sectors = 58633344, start = 0

Model=ST330621A, FwRev=3.39, SerialNonE095XB
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS383/16/63, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=0(?), BuffSize24kB, MaxMultSect, MultSect
DblWordIO=no, OldPIO=2, DMA=yes, OldDMA=2
CurCHS383/16/63, CurSects=-66060037, LBA=yes, LBAsectsX633344
tDMA={min:120,rec:120}, DMA modes: mword0 mword1 mword2
IORDY=on/off, tPIO={min:240,w/IORDY:120}, PIO modes: mode3 mode4
UDMA modes: mode0 mode1 *mode2 mode3 mode4 mode5

photos intérieur et extérieur sur demande.
avec facture.


Publicité
Poster une réponse
Anonyme