Avec un Pionneer DVR-108 tout neuf (firmware 1.14) je n'arrive pas a
graver correctement un DVD. La verif est toujours Ko avec entre 2 et 6
secteurs defectueux par rapport a la source sur le DD.
tout ceci en ayant fait plusieurs essais sur plusieurs galettes RW, meme
en abassant la vitesse.
Avant de le ramener sous garantie, qulaqu'un aurai une idée?
La gavure de Cd est ok.
ci apres la log nero:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll':
Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero version: 6.6.0.3
Recorder: <PIONEER DVD-RW DVR-108> Version: 1.14 - HA 2 TA
0 - 6.6.0.3
Adapter driver: <nvidesm> HA 2
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ASUS CD-S400/A >Version: 1.40 - HA 2 TA
1 - 6.6.0.3
Adapter driver: <nvidesm> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120M0 YAR5 si3112r Port 1 ID
0 DMA: Off
CdRomPeripheral : PIONEER DVD-RW DVR-108 1.14 nvidesm Port 2 ID
0 DMA: Off
CdRomPeripheral : ASUS CD-S400/A 1.40 nvidesm Port 2 ID
1 DMA: Off
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 405MB (415104kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.1.2005
UDF/ISO compilation
11:35:42 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
11:35:42 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
11:35:42 #3 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:35:42 #5 Text 0 File Reader.cpp, Line 127
Reader running
11:35:42 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-108 running
11:35:42 #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
11:35:42 #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
11:35:42 #9 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using DVD media
11:35:43 #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2285977 (507:59.52, 4464MB)
11:35:43 #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
11:35:43 #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: PIONEER DVD-RW DVR-108, Media type: DVD+RW
Disc Manufacturer ID: SENTINEL, Media Type ID: W02, Product revision
number: 0
Disc Application Code: 0, Extended Information Indicators: 1
11:35:43 #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:35:43 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required,
no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
2286128 blocks [PIONEER DVD-RW DVR-108]
--------------------------------------------------------------
11:35:43 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
11:35:43 #17 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
11:35:43 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
11:35:43 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5 540 KB/s)
11:35:43 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch
infos, orig at #0): write at #0
11:35:43 #21 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer
Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM,
DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: SENTINEL
Media type ID: W02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte
63: 57
Media Specific [16..63]:
00 00 01 53 45 4E 54 49 - 4E 45 4C 57 30 32 00 39 ...SENTINELW02.9
23 00 9F 7C 5C 02 28 00 - 9A 7E 70 02 28 00 A0 7B #..|\.(..~p.(..{
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00 h.(.............
11:35:43 #22 Phase 98 File dlgbrnst.cpp, Line 1832
Start formatting disc before burning
11:36:22 #23 Phase 100 File dlgbrnst.cpp, Line 1832
Formatting disc was successful
11:36:22 #24 Text 0 File DVDPlusRW.cpp, Line 608
Start write address at LBA 0
DVD high compatibility mode: Yes
11:36:24 #25 Text 0 File Cdrdrv.cpp, Line 1282
11:36:24.750 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:36:24 #26 Text 0 File Cdrdrv.cpp, Line 1282
11:36:24.937 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:36:24 #27 Text 0 File Cdrdrv.cpp, Line 1282
11:36:24.968 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:36:25 #28 Text 0 File Cdrdrv.cpp, Line 1282
11:36:25.000 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:36:52 #29 Text 0 File Cdrdrv.cpp, Line 1282
11:36:52.468 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:36:52 #30 Text 0 File Cdrdrv.cpp, Line 1282
11:36:52.515 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:37:15 #31 Text 0 File Cdrdrv.cpp, Line 1282
11:37:15.937 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:37:15 #32 Text 0 File Cdrdrv.cpp, Line 1282
11:37:15.984 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:37:44 #33 Text 0 File Cdrdrv.cpp, Line 1282
11:37:44.109 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:37:55 #34 Text 0 File Cdrdrv.cpp, Line 1282
11:37:55.328 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:37:55 #35 Text 0 File Cdrdrv.cpp, Line 1282
11:37:55.375 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:38:47 #36 Text 0 File Cdrdrv.cpp, Line 1282
11:38:47.531 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:38:47 #37 Text 0 File Cdrdrv.cpp, Line 1282
11:38:47.578 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:39:02 #38 Text 0 File Cdrdrv.cpp, Line 1282
11:39:02.281 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:39:29 #39 Text 0 File Cdrdrv.cpp, Line 1282
11:39:29.125 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:39:31 #40 Text 0 File Cdrdrv.cpp, Line 1282
11:39:31.593 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:39:31 #41 Text 0 File Cdrdrv.cpp, Line 1282
11:39:31.625 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:39:31 #42 Text 0 File Cdrdrv.cpp, Line 1282
11:39:31.656 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:40:31 #43 Text 0 File Cdrdrv.cpp, Line 1282
11:40:31.640 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:40:31 #44 Text 0 File Cdrdrv.cpp, Line 1282
11:40:31.687 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:40:58 #45 Text 0 File Cdrdrv.cpp, Line 1282
11:40:58.843 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:40:58 #46 Text 0 File Cdrdrv.cpp, Line 1282
11:40:58.890 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:41:17 #47 Text 0 File Cdrdrv.cpp, Line 1282
11:41:17.031 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:41:51 #48 Text 0 File Cdrdrv.cpp, Line 1282
11:41:51.703 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:41:51 #49 Text 0 File Cdrdrv.cpp, Line 1282
11:41:51.750 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:42:08 #50 Text 0 File Cdrdrv.cpp, Line 1282
11:42:08.890 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:42:08 #51 Text 0 File Cdrdrv.cpp, Line 1282
11:42:08.937 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:42:14 #52 Text 0 File Cdrdrv.cpp, Line 1282
11:42:14.843 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:42:14 #53 Text 0 File Cdrdrv.cpp, Line 1282
11:42:14.890 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:42:17 #54 Text 0 File Cdrdrv.cpp, Line 1282
11:42:17.093 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:42:26 #55 Text 0 File Cdrdrv.cpp, Line 1282
11:42:26.750 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:42:53 #56 Text 0 File Cdrdrv.cpp, Line 1282
11:42:53.359 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:42:56 #57 Text 0 File Cdrdrv.cpp, Line 1282
11:42:56.140 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:42:56 #58 Text 0 File Cdrdrv.cpp, Line 1282
11:42:56.187 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:43:08 #59 Text 0 File Cdrdrv.cpp, Line 1282
11:43:08.031 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:43:08 #60 Text 0 File Cdrdrv.cpp, Line 1282
11:43:08.078 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:43:13 #61 Text 0 File Cdrdrv.cpp, Line 1282
11:43:13.375 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:43:13 #62 Text 0 File Cdrdrv.cpp, Line 1282
11:43:13.406 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:43:44 #63 Text 0 File Cdrdrv.cpp, Line 1282
11:43:44.625 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:45:23 #64 Text 0 File Cdrdrv.cpp, Line 1282
11:45:23.093 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:46:05 #65 Text 0 File Cdrdrv.cpp, Line 1282
11:46:05.875 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:47:35 #66 Text 0 File Cdrdrv.cpp, Line 1282
11:47:35.343 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:47:57 #67 Text 0 File Cdrdrv.cpp, Line 1282
11:47:57.812 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:47:57 #68 Text 0 File Cdrdrv.cpp, Line 1282
11:47:57.859 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:48:41 #69 Text 0 File Cdrdrv.cpp, Line 1282
11:48:41.937 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:48:56 #70 Text 0 File Cdrdrv.cpp, Line 1282
11:48:56.906 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:48:56 #71 Text 0 File Cdrdrv.cpp, Line 1282
11:48:56.953 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:49:31 #72 Text 0 File Cdrdrv.cpp, Line 1282
11:49:31.250 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:49:31 #73 Text 0 File Cdrdrv.cpp, Line 1282
11:49:31.296 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:49:31 #74 Text 0 File Cdrdrv.cpp, Line 1282
11:49:31.343 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:49:32 #75 Text 0 File Cdrdrv.cpp, Line 1282
11:49:32.875 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:49:50 #76 Text 0 File Cdrdrv.cpp, Line 1282
11:49:50.062 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:49:50 #77 Text 0 File Cdrdrv.cpp, Line 1282
11:49:50.109 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:50:02 #78 Text 0 File Cdrdrv.cpp, Line 1282
11:50:02.890 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:50:02 #79 Text 0 File Cdrdrv.cpp, Line 1282
11:50:02.937 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:50:18 #80 Text 0 File Cdrdrv.cpp, Line 1282
11:50:18.843 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:50:18 #81 Text 0 File Cdrdrv.cpp, Line 1282
11:50:18.890 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:50:24 #82 Text 0 File Cdrdrv.cpp, Line 1282
11:50:24.484 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:50:24 #83 Text 0 File Cdrdrv.cpp, Line 1282
11:50:24.531 - PIONEER DVD-RW DVR-108\H2 T0 : Queue again later
11:50:31 #84 Text 0 File WriterStatus.cpp, Line 116
<PIONEER DVD-RW DVR-108 > start writing Lead-Out at LBA 2286128
(22E230h), lenght 0 blocks
11:50:31 #85 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:50:37 #86 Text 0 File DVDPlusRW.cpp, Line 827
Media-Format will be stopped after burning
11:50:37 #87 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
11:51:01 #88 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5 540 KB/s)
11:51:01 #89 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
11:55:56 #90 SectorVerify 11 File Cdrdrv.cpp, Line 9320
Sector 1107208 on disc has different content to source
11:58:19 #91 SectorVerify 11 File Cdrdrv.cpp, Line 9320
Sector 1220455 on disc has different content to source
11:59:29 #92 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:59:29 #93 SectorVerify 11 File Cdrdrv.cpp, Line 9320
Sector 1906419 on disc has different content to source
11:59:29 #94 Phase 81 File dlgbrnst.cpp, Line 1832
Data verification failed
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created
28/10/2003 11:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\nvidesm.sys': Ver=5.10.2600.0307 built by: WinDDK,
size=20224 bytes, created 13/11/2002 08:10:00 (Adapter driver for rec)
Cette action est irreversible, confirmez la suppression du commentaire ?
Signaler le commentaire
Veuillez sélectionner un problème
Nudité
Violence
Harcèlement
Fraude
Vente illégale
Discours haineux
Terrorisme
Autre
willpot
avez-vous questionné AHEAD pour ce pb ?
"bertrand" a écrit dans le message de news: 41e11997$0$7720$
bonjour,
Avec un Pionneer DVR-108 tout neuf (firmware 1.14) je n'arrive pas a graver correctement un DVD. La verif est toujours Ko avec entre 2 et 6 secteurs defectueux par rapport a la source sur le DD. tout ceci en ayant fait plusieurs essais sur plusieurs galettes RW, meme en abassant la vitesse.
Avant de le ramener sous garantie, qulaqu'un aurai une idée? La gavure de Cd est ok.
ci apres la log nero:
Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:Program FilesAheadNeroWnaspi32.dll': Ver=2.0.1.74, size4112 bytes, created 26/10/2004 17:35:34 Nero version: 6.6.0.3 Recorder: <PIONEER DVD-RW DVR-108> Version: 1.14 - HA 2 TA 0 - 6.6.0.3 Adapter driver: <nvidesm> HA 2 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <ASUS CD-S400/A >Version: 1.40 - HA 2 TA 1 - 6.6.0.3 Adapter driver: <nvidesm> HA 2
=== Scsi-Device-Map == > DiskPeripheral : Maxtor 6Y120M0 YAR5 si3112r Port 1 ID 0 DMA: Off CdRomPeripheral : PIONEER DVD-RW DVR-108 1.14 nvidesm Port 2 ID 0 DMA: Off CdRomPeripheral : ASUS CD-S400/A 1.40 nvidesm Port 2 ID 1 DMA: Off
=== CDRom-Device-Map == > PIONEER DVD-RW DVR-108 E: CDRom0 ASUS CD-S400/A F: CDRom1 ====================== > AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 767MB (785904kB) Free physical memory: 405MB (415104kB) Memory in use : 47 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0)
9.1.2005 UDF/ISO compilation 11:35:42 #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started
11:35:42 #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified)
11:35:42 #3 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 2 (Max. of 31 chars) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE
11:35:42 #5 Text 0 File Reader.cpp, Line 127 Reader running
11:35:42 #6 Text 0 File Writer.cpp, Line 122 Writer PIONEER DVD-RW DVR-108 running
11:35:42 #7 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000)
11:35:42 #8 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000)
11:35:42 #9 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-at-once, using DVD media
11:35:43 #10 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2285977 (507:59.52, 4464MB)
11:35:43 #11 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD)
11:35:43 #12 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: PIONEER DVD-RW DVR-108, Media type: DVD+RW Disc Manufacturer ID: SENTINEL, Media Type ID: W02, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 1
11:35:43 #13 Text 0 File DlgWaitCD.cpp, Line 430
Protocol of DlgWaitCD activities: <<< ======================================== >
11:35:43 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [PIONEER DVD-RW DVR-108] --------------------------------------------------------------
11:35:43 #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started
11:35:43 #17 Text 0 File Burncd.cpp, Line 4038 Cache writing successful.
11:35:43 #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed
11:35:43 #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5 540 KB/s)
11:35:43 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:35:43 #21 Text 0 File Cdrdrv.cpp, Line 8315 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+RW (9), Part Version: 2 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: SENTINEL Media type ID: W02 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 57 Media Specific [16..63]: 00 00 01 53 45 4E 54 49 - 4E 45 4C 57 30 32 00 39 ...SENTINELW02.9
"bertrand" <b.leterrier@free.fr> a écrit dans le message de news:
41e11997$0$7720$636a15ce@news.free.fr...
bonjour,
Avec un Pionneer DVR-108 tout neuf (firmware 1.14) je n'arrive pas a
graver correctement un DVD. La verif est toujours Ko avec entre 2 et 6
secteurs defectueux par rapport a la source sur le DD.
tout ceci en ayant fait plusieurs essais sur plusieurs galettes RW, meme
en abassant la vitesse.
Avant de le ramener sous garantie, qulaqu'un aurai une idée?
La gavure de Cd est ok.
ci apres la log nero:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:Program FilesAheadNeroWnaspi32.dll':
Ver=2.0.1.74, size4112 bytes, created 26/10/2004 17:35:34
Nero version: 6.6.0.3
Recorder: <PIONEER DVD-RW DVR-108> Version: 1.14 - HA 2 TA
0 - 6.6.0.3
Adapter driver: <nvidesm> HA 2
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ASUS CD-S400/A >Version: 1.40 - HA 2 TA
1 - 6.6.0.3
Adapter driver: <nvidesm> HA 2
=== Scsi-Device-Map == > DiskPeripheral : Maxtor 6Y120M0 YAR5 si3112r Port 1 ID
0 DMA: Off
CdRomPeripheral : PIONEER DVD-RW DVR-108 1.14 nvidesm Port 2 ID
0 DMA: Off
CdRomPeripheral : ASUS CD-S400/A 1.40 nvidesm Port 2 ID
1 DMA: Off
=== CDRom-Device-Map == > PIONEER DVD-RW DVR-108 E: CDRom0
ASUS CD-S400/A F: CDRom1
====================== >
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 405MB (415104kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.1.2005
UDF/ISO compilation
11:35:42 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
11:35:42 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
11:35:42 #3 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:35:42 #5 Text 0 File Reader.cpp, Line 127
Reader running
11:35:42 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-108 running
11:35:42 #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
11:35:42 #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
11:35:42 #9 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using DVD media
11:35:43 #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2285977 (507:59.52, 4464MB)
11:35:43 #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
11:35:43 #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: PIONEER DVD-RW DVR-108, Media type: DVD+RW
Disc Manufacturer ID: SENTINEL, Media Type ID: W02, Product revision
number: 0
Disc Application Code: 0, Extended Information Indicators: 1
11:35:43 #13 Text 0 File DlgWaitCD.cpp, Line 430
Protocol of DlgWaitCD activities: <<<
======================================== >
11:35:43 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required,
no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
2286128 blocks [PIONEER DVD-RW DVR-108]
--------------------------------------------------------------
11:35:43 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
11:35:43 #17 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
11:35:43 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
11:35:43 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5 540 KB/s)
11:35:43 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch
infos, orig at #0): write at #0
11:35:43 #21 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer
Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM,
DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: SENTINEL
Media type ID: W02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte
63: 57
Media Specific [16..63]:
00 00 01 53 45 4E 54 49 - 4E 45 4C 57 30 32 00 39
...SENTINELW02.9
"bertrand" a écrit dans le message de news: 41e11997$0$7720$
bonjour,
Avec un Pionneer DVR-108 tout neuf (firmware 1.14) je n'arrive pas a graver correctement un DVD. La verif est toujours Ko avec entre 2 et 6 secteurs defectueux par rapport a la source sur le DD. tout ceci en ayant fait plusieurs essais sur plusieurs galettes RW, meme en abassant la vitesse.
Avant de le ramener sous garantie, qulaqu'un aurai une idée? La gavure de Cd est ok.
ci apres la log nero:
Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:Program FilesAheadNeroWnaspi32.dll': Ver=2.0.1.74, size4112 bytes, created 26/10/2004 17:35:34 Nero version: 6.6.0.3 Recorder: <PIONEER DVD-RW DVR-108> Version: 1.14 - HA 2 TA 0 - 6.6.0.3 Adapter driver: <nvidesm> HA 2 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <ASUS CD-S400/A >Version: 1.40 - HA 2 TA 1 - 6.6.0.3 Adapter driver: <nvidesm> HA 2
=== Scsi-Device-Map == > DiskPeripheral : Maxtor 6Y120M0 YAR5 si3112r Port 1 ID 0 DMA: Off CdRomPeripheral : PIONEER DVD-RW DVR-108 1.14 nvidesm Port 2 ID 0 DMA: Off CdRomPeripheral : ASUS CD-S400/A 1.40 nvidesm Port 2 ID 1 DMA: Off
=== CDRom-Device-Map == > PIONEER DVD-RW DVR-108 E: CDRom0 ASUS CD-S400/A F: CDRom1 ====================== > AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 767MB (785904kB) Free physical memory: 405MB (415104kB) Memory in use : 47 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0)
9.1.2005 UDF/ISO compilation 11:35:42 #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started
11:35:42 #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified)
11:35:42 #3 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 2 (Max. of 31 chars) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE
11:35:42 #5 Text 0 File Reader.cpp, Line 127 Reader running
11:35:42 #6 Text 0 File Writer.cpp, Line 122 Writer PIONEER DVD-RW DVR-108 running
11:35:42 #7 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000)
11:35:42 #8 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000)
11:35:42 #9 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-at-once, using DVD media
11:35:43 #10 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2285977 (507:59.52, 4464MB)
11:35:43 #11 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD)
11:35:43 #12 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: PIONEER DVD-RW DVR-108, Media type: DVD+RW Disc Manufacturer ID: SENTINEL, Media Type ID: W02, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 1
11:35:43 #13 Text 0 File DlgWaitCD.cpp, Line 430
Protocol of DlgWaitCD activities: <<< ======================================== >
11:35:43 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [PIONEER DVD-RW DVR-108] --------------------------------------------------------------
11:35:43 #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started
11:35:43 #17 Text 0 File Burncd.cpp, Line 4038 Cache writing successful.
11:35:43 #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed
11:35:43 #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5 540 KB/s)
11:35:43 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:35:43 #21 Text 0 File Cdrdrv.cpp, Line 8315 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+RW (9), Part Version: 2 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: SENTINEL Media type ID: W02 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 57 Media Specific [16..63]: 00 00 01 53 45 4E 54 49 - 4E 45 4C 57 30 32 00 39 ...SENTINELW02.9
"bertrand" a écrit dans le message de news: 41e11997$0$7720$
bonjour,
Avec un Pionneer DVR-108 tout neuf (firmware 1.14) je n'arrive pas a graver correctement un DVD. La verif est toujours Ko avec entre 2 et 6 secteurs defectueux par rapport a la source sur le DD. tout ceci en ayant fait plusieurs essais sur plusieurs galettes RW, meme en abassant la vitesse.
Avant de le ramener sous garantie, qulaqu'un aurai une idée? La gavure de Cd est ok.
ci apres la log nero:
Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:Program FilesAheadNeroWnaspi32.dll': Ver=2.0.1.74, size4112 bytes, created 26/10/2004 17:35:34 Nero version: 6.6.0.3 Recorder: <PIONEER DVD-RW DVR-108> Version: 1.14 - HA 2 TA 0 - 6.6.0.3 Adapter driver: <nvidesm> HA 2 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <ASUS CD-S400/A >Version: 1.40 - HA 2 TA 1 - 6.6.0.3 Adapter driver: <nvidesm> HA 2
=== Scsi-Device-Map == >>DiskPeripheral : Maxtor 6Y120M0 YAR5 si3112r Port 1 ID 0 DMA: Off CdRomPeripheral : PIONEER DVD-RW DVR-108 1.14 nvidesm Port 2 ID 0 DMA: Off CdRomPeripheral : ASUS CD-S400/A 1.40 nvidesm Port 2 ID 1 DMA: Off
=== CDRom-Device-Map == >>PIONEER DVD-RW DVR-108 E: CDRom0 ASUS CD-S400/A F: CDRom1 ====================== >> AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 767MB (785904kB) Free physical memory: 405MB (415104kB) Memory in use : 47 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0)
9.1.2005 UDF/ISO compilation 11:35:42 #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started
11:35:42 #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified)
11:35:42 #3 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 2 (Max. of 31 chars) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE
11:35:42 #5 Text 0 File Reader.cpp, Line 127 Reader running
11:35:42 #6 Text 0 File Writer.cpp, Line 122 Writer PIONEER DVD-RW DVR-108 running
11:35:42 #7 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000)
11:35:42 #8 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000)
11:35:42 #9 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-at-once, using DVD media
11:35:43 #10 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2285977 (507:59.52, 4464MB)
11:35:43 #11 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD)
11:35:43 #12 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: PIONEER DVD-RW DVR-108, Media type: DVD+RW Disc Manufacturer ID: SENTINEL, Media Type ID: W02, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 1
11:35:43 #13 Text 0 File DlgWaitCD.cpp, Line 430
Protocol of DlgWaitCD activities: <<<
======================================== >> 11:35:43 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [PIONEER DVD-RW DVR-108] --------------------------------------------------------------
11:35:43 #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started
11:35:43 #17 Text 0 File Burncd.cpp, Line 4038 Cache writing successful.
11:35:43 #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed
11:35:43 #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5 540 KB/s)
11:35:43 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:35:43 #21 Text 0 File Cdrdrv.cpp, Line 8315 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+RW (9), Part Version: 2 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: SENTINEL Media type ID: W02 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 57 Media Specific [16..63]: 00 00 01 53 45 4E 54 49 - 4E 45 4C 57 30 32 00 39
...SENTINELW02.9
23 00 9F 7C 5C 02 28 00 - 9A 7E 70 02 28 00 A0 7B
#..|.(..~p.(..{
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00
h.(.............
11:35:43 #22 Phase 98 File dlgbrnst.cpp, Line 1832 Start formatting disc before burning
11:36:22 #23 Phase 100 File dlgbrnst.cpp, Line 1832 Formatting disc was successful
11:36:22 #24 Text 0 File DVDPlusRW.cpp, Line 608 Start write address at LBA 0 DVD high compatibility mode: Yes
11:36:24 #25 Text 0 File Cdrdrv.cpp, Line 1282 11:36:24.750 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:36:24 #26 Text 0 File Cdrdrv.cpp, Line 1282 11:36:24.937 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:36:24 #27 Text 0 File Cdrdrv.cpp, Line 1282 11:36:24.968 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:36:25 #28 Text 0 File Cdrdrv.cpp, Line 1282 11:36:25.000 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:36:52 #29 Text 0 File Cdrdrv.cpp, Line 1282 11:36:52.468 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:36:52 #30 Text 0 File Cdrdrv.cpp, Line 1282 11:36:52.515 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:37:15 #31 Text 0 File Cdrdrv.cpp, Line 1282 11:37:15.937 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:37:15 #32 Text 0 File Cdrdrv.cpp, Line 1282 11:37:15.984 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:37:44 #33 Text 0 File Cdrdrv.cpp, Line 1282 11:37:44.109 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:37:55 #34 Text 0 File Cdrdrv.cpp, Line 1282 11:37:55.328 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:37:55 #35 Text 0 File Cdrdrv.cpp, Line 1282 11:37:55.375 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:38:47 #36 Text 0 File Cdrdrv.cpp, Line 1282 11:38:47.531 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:38:47 #37 Text 0 File Cdrdrv.cpp, Line 1282 11:38:47.578 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:39:02 #38 Text 0 File Cdrdrv.cpp, Line 1282 11:39:02.281 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:39:29 #39 Text 0 File Cdrdrv.cpp, Line 1282 11:39:29.125 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:39:31 #40 Text 0 File Cdrdrv.cpp, Line 1282 11:39:31.593 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:39:31 #41 Text 0 File Cdrdrv.cpp, Line 1282 11:39:31.625 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:39:31 #42 Text 0 File Cdrdrv.cpp, Line 1282 11:39:31.656 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:40:31 #43 Text 0 File Cdrdrv.cpp, Line 1282 11:40:31.640 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:40:31 #44 Text 0 File Cdrdrv.cpp, Line 1282 11:40:31.687 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:40:58 #45 Text 0 File Cdrdrv.cpp, Line 1282 11:40:58.843 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:40:58 #46 Text 0 File Cdrdrv.cpp, Line 1282 11:40:58.890 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:41:17 #47 Text 0 File Cdrdrv.cpp, Line 1282 11:41:17.031 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:41:51 #48 Text 0 File Cdrdrv.cpp, Line 1282 11:41:51.703 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:41:51 #49 Text 0 File Cdrdrv.cpp, Line 1282 11:41:51.750 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:08 #50 Text 0 File Cdrdrv.cpp, Line 1282 11:42:08.890 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:08 #51 Text 0 File Cdrdrv.cpp, Line 1282 11:42:08.937 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:14 #52 Text 0 File Cdrdrv.cpp, Line 1282 11:42:14.843 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:14 #53 Text 0 File Cdrdrv.cpp, Line 1282 11:42:14.890 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:17 #54 Text 0 File Cdrdrv.cpp, Line 1282 11:42:17.093 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:26 #55 Text 0 File Cdrdrv.cpp, Line 1282 11:42:26.750 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:53 #56 Text 0 File Cdrdrv.cpp, Line 1282 11:42:53.359 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:56 #57 Text 0 File Cdrdrv.cpp, Line 1282 11:42:56.140 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:56 #58 Text 0 File Cdrdrv.cpp, Line 1282 11:42:56.187 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:43:08 #59 Text 0 File Cdrdrv.cpp, Line 1282 11:43:08.031 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:43:08 #60 Text 0 File Cdrdrv.cpp, Line 1282 11:43:08.078 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:43:13 #61 Text 0 File Cdrdrv.cpp, Line 1282 11:43:13.375 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:43:13 #62 Text 0 File Cdrdrv.cpp, Line 1282 11:43:13.406 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:43:44 #63 Text 0 File Cdrdrv.cpp, Line 1282 11:43:44.625 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:45:23 #64 Text 0 File Cdrdrv.cpp, Line 1282 11:45:23.093 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:46:05 #65 Text 0 File Cdrdrv.cpp, Line 1282 11:46:05.875 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:47:35 #66 Text 0 File Cdrdrv.cpp, Line 1282 11:47:35.343 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:47:57 #67 Text 0 File Cdrdrv.cpp, Line 1282 11:47:57.812 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:47:57 #68 Text 0 File Cdrdrv.cpp, Line 1282 11:47:57.859 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:48:41 #69 Text 0 File Cdrdrv.cpp, Line 1282 11:48:41.937 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:48:56 #70 Text 0 File Cdrdrv.cpp, Line 1282 11:48:56.906 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:48:56 #71 Text 0 File Cdrdrv.cpp, Line 1282 11:48:56.953 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:49:31 #72 Text 0 File Cdrdrv.cpp, Line 1282 11:49:31.250 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:49:31 #73 Text 0 File Cdrdrv.cpp, Line 1282 11:49:31.296 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:49:31 #74 Text 0 File Cdrdrv.cpp, Line 1282 11:49:31.343 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:49:32 #75 Text 0 File Cdrdrv.cpp, Line 1282 11:49:32.875 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:49:50 #76 Text 0 File Cdrdrv.cpp, Line 1282 11:49:50.062 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:49:50 #77 Text 0 File Cdrdrv.cpp, Line 1282 11:49:50.109 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:50:02 #78 Text 0 File Cdrdrv.cpp, Line 1282 11:50:02.890 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:50:02 #79 Text 0 File Cdrdrv.cpp, Line 1282 11:50:02.937 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:50:18 #80 Text 0 File Cdrdrv.cpp, Line 1282 11:50:18.843 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:50:18 #81 Text 0 File Cdrdrv.cpp, Line 1282 11:50:18.890 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:50:24 #82 Text 0 File Cdrdrv.cpp, Line 1282 11:50:24.484 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:50:24 #83 Text 0 File Cdrdrv.cpp, Line 1282 11:50:24.531 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:50:31 #84 Text 0 File WriterStatus.cpp, Line 116 <PIONEER DVD-RW DVR-108 > start writing Lead-Out at LBA 2286128 (22E230h), lenght 0 blocks
11:50:31 #85 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion
11:50:37 #86 Text 0 File DVDPlusRW.cpp, Line 827 Media-Format will be stopped after burning
11:50:37 #87 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders
11:51:01 #88 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 4x (5 540 KB/s)
11:51:01 #89 Phase 78 File dlgbrnst.cpp, Line 1832 Data verification started
11:55:56 #90 SectorVerify 11 File Cdrdrv.cpp, Line 9320 Sector 1107208 on disc has different content to source
11:58:19 #91 SectorVerify 11 File Cdrdrv.cpp, Line 9320 Sector 1220455 on disc has different content to source
11:59:29 #92 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion
11:59:29 #93 SectorVerify 11 File Cdrdrv.cpp, Line 9320 Sector 1906419 on disc has different content to source
11:59:29 #94 Phase 81 File dlgbrnst.cpp, Line 1832 Data verification failed
Existing drivers: File 'DriversPXHELP20.SYS': Ver=2.02.62a, size 016 bytes, created 28/10/2003 11:02:00 (Prassi/Veritas driver for win 2K) File 'Driversnvidesm.sys': Ver=5.10.2600.0307 built by: WinDDK, size 224 bytes, created 13/11/2002 08:10:00 (Adapter driver for rec)
non, pour l'instant je m'acharne a tester toutes les configs materielles
possibles (ide master, slave)
avez-vous questionné AHEAD pour ce pb ?
"bertrand" <b.leterrier@free.fr> a écrit dans le message de news:
41e11997$0$7720$636a15ce@news.free.fr...
bonjour,
Avec un Pionneer DVR-108 tout neuf (firmware 1.14) je n'arrive pas a
graver correctement un DVD. La verif est toujours Ko avec entre 2 et 6
secteurs defectueux par rapport a la source sur le DD.
tout ceci en ayant fait plusieurs essais sur plusieurs galettes RW, meme
en abassant la vitesse.
Avant de le ramener sous garantie, qulaqu'un aurai une idée?
La gavure de Cd est ok.
ci apres la log nero:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:Program FilesAheadNeroWnaspi32.dll':
Ver=2.0.1.74, size4112 bytes, created 26/10/2004 17:35:34
Nero version: 6.6.0.3
Recorder: <PIONEER DVD-RW DVR-108> Version: 1.14 - HA 2 TA
0 - 6.6.0.3
Adapter driver: <nvidesm> HA 2
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ASUS CD-S400/A >Version: 1.40 - HA 2 TA
1 - 6.6.0.3
Adapter driver: <nvidesm> HA 2
=== Scsi-Device-Map == >>DiskPeripheral : Maxtor 6Y120M0 YAR5 si3112r Port 1 ID
0 DMA: Off
CdRomPeripheral : PIONEER DVD-RW DVR-108 1.14 nvidesm Port 2 ID
0 DMA: Off
CdRomPeripheral : ASUS CD-S400/A 1.40 nvidesm Port 2 ID
1 DMA: Off
=== CDRom-Device-Map == >>PIONEER DVD-RW DVR-108 E: CDRom0
ASUS CD-S400/A F: CDRom1
====================== >>
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 405MB (415104kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.1.2005
UDF/ISO compilation
11:35:42 #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
11:35:42 #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
11:35:42 #3 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:35:42 #5 Text 0 File Reader.cpp, Line 127
Reader running
11:35:42 #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-108 running
11:35:42 #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
11:35:42 #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
11:35:42 #9 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using DVD media
11:35:43 #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2285977 (507:59.52, 4464MB)
11:35:43 #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
11:35:43 #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: PIONEER DVD-RW DVR-108, Media type: DVD+RW
Disc Manufacturer ID: SENTINEL, Media Type ID: W02, Product revision
number: 0
Disc Application Code: 0, Extended Information Indicators: 1
11:35:43 #13 Text 0 File DlgWaitCD.cpp, Line 430
Protocol of DlgWaitCD activities: <<<
======================================== >>
11:35:43 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required,
no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
2286128 blocks [PIONEER DVD-RW DVR-108]
--------------------------------------------------------------
11:35:43 #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
11:35:43 #17 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
11:35:43 #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
11:35:43 #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5 540 KB/s)
11:35:43 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch
infos, orig at #0): write at #0
11:35:43 #21 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer
Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM,
DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: SENTINEL
Media type ID: W02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte
63: 57
Media Specific [16..63]:
00 00 01 53 45 4E 54 49 - 4E 45 4C 57 30 32 00 39
...SENTINELW02.9
23 00 9F 7C 5C 02 28 00 - 9A 7E 70 02 28 00 A0 7B
#..|.(..~p.(..{
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00
h.(.............
11:35:43 #22 Phase 98 File dlgbrnst.cpp, Line 1832
Start formatting disc before burning
11:36:22 #23 Phase 100 File dlgbrnst.cpp, Line 1832
Formatting disc was successful
11:36:22 #24 Text 0 File DVDPlusRW.cpp, Line 608
Start write address at LBA 0
DVD high compatibility mode: Yes
11:36:24 #25 Text 0 File Cdrdrv.cpp, Line 1282
11:36:24.750 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:36:24 #26 Text 0 File Cdrdrv.cpp, Line 1282
11:36:24.937 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:36:24 #27 Text 0 File Cdrdrv.cpp, Line 1282
11:36:24.968 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:36:25 #28 Text 0 File Cdrdrv.cpp, Line 1282
11:36:25.000 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:36:52 #29 Text 0 File Cdrdrv.cpp, Line 1282
11:36:52.468 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:36:52 #30 Text 0 File Cdrdrv.cpp, Line 1282
11:36:52.515 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:37:15 #31 Text 0 File Cdrdrv.cpp, Line 1282
11:37:15.937 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:37:15 #32 Text 0 File Cdrdrv.cpp, Line 1282
11:37:15.984 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:37:44 #33 Text 0 File Cdrdrv.cpp, Line 1282
11:37:44.109 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:37:55 #34 Text 0 File Cdrdrv.cpp, Line 1282
11:37:55.328 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:37:55 #35 Text 0 File Cdrdrv.cpp, Line 1282
11:37:55.375 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:38:47 #36 Text 0 File Cdrdrv.cpp, Line 1282
11:38:47.531 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:38:47 #37 Text 0 File Cdrdrv.cpp, Line 1282
11:38:47.578 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:39:02 #38 Text 0 File Cdrdrv.cpp, Line 1282
11:39:02.281 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:39:29 #39 Text 0 File Cdrdrv.cpp, Line 1282
11:39:29.125 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:39:31 #40 Text 0 File Cdrdrv.cpp, Line 1282
11:39:31.593 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:39:31 #41 Text 0 File Cdrdrv.cpp, Line 1282
11:39:31.625 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:39:31 #42 Text 0 File Cdrdrv.cpp, Line 1282
11:39:31.656 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:40:31 #43 Text 0 File Cdrdrv.cpp, Line 1282
11:40:31.640 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:40:31 #44 Text 0 File Cdrdrv.cpp, Line 1282
11:40:31.687 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:40:58 #45 Text 0 File Cdrdrv.cpp, Line 1282
11:40:58.843 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:40:58 #46 Text 0 File Cdrdrv.cpp, Line 1282
11:40:58.890 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:41:17 #47 Text 0 File Cdrdrv.cpp, Line 1282
11:41:17.031 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:41:51 #48 Text 0 File Cdrdrv.cpp, Line 1282
11:41:51.703 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:41:51 #49 Text 0 File Cdrdrv.cpp, Line 1282
11:41:51.750 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:08 #50 Text 0 File Cdrdrv.cpp, Line 1282
11:42:08.890 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:08 #51 Text 0 File Cdrdrv.cpp, Line 1282
11:42:08.937 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:14 #52 Text 0 File Cdrdrv.cpp, Line 1282
11:42:14.843 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:14 #53 Text 0 File Cdrdrv.cpp, Line 1282
11:42:14.890 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:17 #54 Text 0 File Cdrdrv.cpp, Line 1282
11:42:17.093 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:26 #55 Text 0 File Cdrdrv.cpp, Line 1282
11:42:26.750 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:53 #56 Text 0 File Cdrdrv.cpp, Line 1282
11:42:53.359 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:56 #57 Text 0 File Cdrdrv.cpp, Line 1282
11:42:56.140 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:56 #58 Text 0 File Cdrdrv.cpp, Line 1282
11:42:56.187 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:43:08 #59 Text 0 File Cdrdrv.cpp, Line 1282
11:43:08.031 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:43:08 #60 Text 0 File Cdrdrv.cpp, Line 1282
11:43:08.078 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:43:13 #61 Text 0 File Cdrdrv.cpp, Line 1282
11:43:13.375 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:43:13 #62 Text 0 File Cdrdrv.cpp, Line 1282
11:43:13.406 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:43:44 #63 Text 0 File Cdrdrv.cpp, Line 1282
11:43:44.625 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:45:23 #64 Text 0 File Cdrdrv.cpp, Line 1282
11:45:23.093 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:46:05 #65 Text 0 File Cdrdrv.cpp, Line 1282
11:46:05.875 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:47:35 #66 Text 0 File Cdrdrv.cpp, Line 1282
11:47:35.343 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:47:57 #67 Text 0 File Cdrdrv.cpp, Line 1282
11:47:57.812 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:47:57 #68 Text 0 File Cdrdrv.cpp, Line 1282
11:47:57.859 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:48:41 #69 Text 0 File Cdrdrv.cpp, Line 1282
11:48:41.937 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:48:56 #70 Text 0 File Cdrdrv.cpp, Line 1282
11:48:56.906 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:48:56 #71 Text 0 File Cdrdrv.cpp, Line 1282
11:48:56.953 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:49:31 #72 Text 0 File Cdrdrv.cpp, Line 1282
11:49:31.250 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:49:31 #73 Text 0 File Cdrdrv.cpp, Line 1282
11:49:31.296 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:49:31 #74 Text 0 File Cdrdrv.cpp, Line 1282
11:49:31.343 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:49:32 #75 Text 0 File Cdrdrv.cpp, Line 1282
11:49:32.875 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:49:50 #76 Text 0 File Cdrdrv.cpp, Line 1282
11:49:50.062 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:49:50 #77 Text 0 File Cdrdrv.cpp, Line 1282
11:49:50.109 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:50:02 #78 Text 0 File Cdrdrv.cpp, Line 1282
11:50:02.890 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:50:02 #79 Text 0 File Cdrdrv.cpp, Line 1282
11:50:02.937 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:50:18 #80 Text 0 File Cdrdrv.cpp, Line 1282
11:50:18.843 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:50:18 #81 Text 0 File Cdrdrv.cpp, Line 1282
11:50:18.890 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:50:24 #82 Text 0 File Cdrdrv.cpp, Line 1282
11:50:24.484 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:50:24 #83 Text 0 File Cdrdrv.cpp, Line 1282
11:50:24.531 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:50:31 #84 Text 0 File WriterStatus.cpp, Line 116
<PIONEER DVD-RW DVR-108 > start writing Lead-Out at LBA 2286128
(22E230h), lenght 0 blocks
11:50:31 #85 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:50:37 #86 Text 0 File DVDPlusRW.cpp, Line 827
Media-Format will be stopped after burning
11:50:37 #87 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
11:51:01 #88 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5 540 KB/s)
11:51:01 #89 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started
11:55:56 #90 SectorVerify 11 File Cdrdrv.cpp, Line 9320
Sector 1107208 on disc has different content to source
11:58:19 #91 SectorVerify 11 File Cdrdrv.cpp, Line 9320
Sector 1220455 on disc has different content to source
11:59:29 #92 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:59:29 #93 SectorVerify 11 File Cdrdrv.cpp, Line 9320
Sector 1906419 on disc has different content to source
11:59:29 #94 Phase 81 File dlgbrnst.cpp, Line 1832
Data verification failed
Existing drivers:
File 'DriversPXHELP20.SYS': Ver=2.02.62a, size 016 bytes, created
28/10/2003 11:02:00 (Prassi/Veritas driver for win 2K)
File 'Driversnvidesm.sys': Ver=5.10.2600.0307 built by: WinDDK,
size 224 bytes, created 13/11/2002 08:10:00 (Adapter driver for rec)
"bertrand" a écrit dans le message de news: 41e11997$0$7720$
bonjour,
Avec un Pionneer DVR-108 tout neuf (firmware 1.14) je n'arrive pas a graver correctement un DVD. La verif est toujours Ko avec entre 2 et 6 secteurs defectueux par rapport a la source sur le DD. tout ceci en ayant fait plusieurs essais sur plusieurs galettes RW, meme en abassant la vitesse.
Avant de le ramener sous garantie, qulaqu'un aurai une idée? La gavure de Cd est ok.
ci apres la log nero:
Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:Program FilesAheadNeroWnaspi32.dll': Ver=2.0.1.74, size4112 bytes, created 26/10/2004 17:35:34 Nero version: 6.6.0.3 Recorder: <PIONEER DVD-RW DVR-108> Version: 1.14 - HA 2 TA 0 - 6.6.0.3 Adapter driver: <nvidesm> HA 2 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <ASUS CD-S400/A >Version: 1.40 - HA 2 TA 1 - 6.6.0.3 Adapter driver: <nvidesm> HA 2
=== Scsi-Device-Map == >>DiskPeripheral : Maxtor 6Y120M0 YAR5 si3112r Port 1 ID 0 DMA: Off CdRomPeripheral : PIONEER DVD-RW DVR-108 1.14 nvidesm Port 2 ID 0 DMA: Off CdRomPeripheral : ASUS CD-S400/A 1.40 nvidesm Port 2 ID 1 DMA: Off
=== CDRom-Device-Map == >>PIONEER DVD-RW DVR-108 E: CDRom0 ASUS CD-S400/A F: CDRom1 ====================== >> AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 767MB (785904kB) Free physical memory: 405MB (415104kB) Memory in use : 47 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0)
9.1.2005 UDF/ISO compilation 11:35:42 #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started
11:35:42 #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified)
11:35:42 #3 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 2 (Max. of 31 chars) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE
11:35:42 #5 Text 0 File Reader.cpp, Line 127 Reader running
11:35:42 #6 Text 0 File Writer.cpp, Line 122 Writer PIONEER DVD-RW DVR-108 running
11:35:42 #7 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000)
11:35:42 #8 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000)
11:35:42 #9 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-at-once, using DVD media
11:35:43 #10 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2285977 (507:59.52, 4464MB)
11:35:43 #11 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD)
11:35:43 #12 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: PIONEER DVD-RW DVR-108, Media type: DVD+RW Disc Manufacturer ID: SENTINEL, Media Type ID: W02, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 1
11:35:43 #13 Text 0 File DlgWaitCD.cpp, Line 430
Protocol of DlgWaitCD activities: <<<
======================================== >> 11:35:43 #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [PIONEER DVD-RW DVR-108] --------------------------------------------------------------
11:35:43 #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started
11:35:43 #17 Text 0 File Burncd.cpp, Line 4038 Cache writing successful.
11:35:43 #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed
11:35:43 #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5 540 KB/s)
11:35:43 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:35:43 #21 Text 0 File Cdrdrv.cpp, Line 8315 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+RW (9), Part Version: 2 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: SENTINEL Media type ID: W02 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 57 Media Specific [16..63]: 00 00 01 53 45 4E 54 49 - 4E 45 4C 57 30 32 00 39
...SENTINELW02.9
23 00 9F 7C 5C 02 28 00 - 9A 7E 70 02 28 00 A0 7B
#..|.(..~p.(..{
68 02 28 04 04 20 E0 00 - F0 00 00 00 00 00 00 00
h.(.............
11:35:43 #22 Phase 98 File dlgbrnst.cpp, Line 1832 Start formatting disc before burning
11:36:22 #23 Phase 100 File dlgbrnst.cpp, Line 1832 Formatting disc was successful
11:36:22 #24 Text 0 File DVDPlusRW.cpp, Line 608 Start write address at LBA 0 DVD high compatibility mode: Yes
11:36:24 #25 Text 0 File Cdrdrv.cpp, Line 1282 11:36:24.750 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:36:24 #26 Text 0 File Cdrdrv.cpp, Line 1282 11:36:24.937 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:36:24 #27 Text 0 File Cdrdrv.cpp, Line 1282 11:36:24.968 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:36:25 #28 Text 0 File Cdrdrv.cpp, Line 1282 11:36:25.000 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:36:52 #29 Text 0 File Cdrdrv.cpp, Line 1282 11:36:52.468 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:36:52 #30 Text 0 File Cdrdrv.cpp, Line 1282 11:36:52.515 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:37:15 #31 Text 0 File Cdrdrv.cpp, Line 1282 11:37:15.937 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:37:15 #32 Text 0 File Cdrdrv.cpp, Line 1282 11:37:15.984 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:37:44 #33 Text 0 File Cdrdrv.cpp, Line 1282 11:37:44.109 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:37:55 #34 Text 0 File Cdrdrv.cpp, Line 1282 11:37:55.328 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:37:55 #35 Text 0 File Cdrdrv.cpp, Line 1282 11:37:55.375 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:38:47 #36 Text 0 File Cdrdrv.cpp, Line 1282 11:38:47.531 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:38:47 #37 Text 0 File Cdrdrv.cpp, Line 1282 11:38:47.578 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:39:02 #38 Text 0 File Cdrdrv.cpp, Line 1282 11:39:02.281 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:39:29 #39 Text 0 File Cdrdrv.cpp, Line 1282 11:39:29.125 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:39:31 #40 Text 0 File Cdrdrv.cpp, Line 1282 11:39:31.593 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:39:31 #41 Text 0 File Cdrdrv.cpp, Line 1282 11:39:31.625 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:39:31 #42 Text 0 File Cdrdrv.cpp, Line 1282 11:39:31.656 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:40:31 #43 Text 0 File Cdrdrv.cpp, Line 1282 11:40:31.640 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:40:31 #44 Text 0 File Cdrdrv.cpp, Line 1282 11:40:31.687 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:40:58 #45 Text 0 File Cdrdrv.cpp, Line 1282 11:40:58.843 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:40:58 #46 Text 0 File Cdrdrv.cpp, Line 1282 11:40:58.890 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:41:17 #47 Text 0 File Cdrdrv.cpp, Line 1282 11:41:17.031 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:41:51 #48 Text 0 File Cdrdrv.cpp, Line 1282 11:41:51.703 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:41:51 #49 Text 0 File Cdrdrv.cpp, Line 1282 11:41:51.750 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:08 #50 Text 0 File Cdrdrv.cpp, Line 1282 11:42:08.890 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:08 #51 Text 0 File Cdrdrv.cpp, Line 1282 11:42:08.937 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:14 #52 Text 0 File Cdrdrv.cpp, Line 1282 11:42:14.843 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:14 #53 Text 0 File Cdrdrv.cpp, Line 1282 11:42:14.890 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:17 #54 Text 0 File Cdrdrv.cpp, Line 1282 11:42:17.093 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:26 #55 Text 0 File Cdrdrv.cpp, Line 1282 11:42:26.750 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:53 #56 Text 0 File Cdrdrv.cpp, Line 1282 11:42:53.359 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:56 #57 Text 0 File Cdrdrv.cpp, Line 1282 11:42:56.140 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:42:56 #58 Text 0 File Cdrdrv.cpp, Line 1282 11:42:56.187 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:43:08 #59 Text 0 File Cdrdrv.cpp, Line 1282 11:43:08.031 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:43:08 #60 Text 0 File Cdrdrv.cpp, Line 1282 11:43:08.078 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:43:13 #61 Text 0 File Cdrdrv.cpp, Line 1282 11:43:13.375 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:43:13 #62 Text 0 File Cdrdrv.cpp, Line 1282 11:43:13.406 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:43:44 #63 Text 0 File Cdrdrv.cpp, Line 1282 11:43:44.625 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:45:23 #64 Text 0 File Cdrdrv.cpp, Line 1282 11:45:23.093 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:46:05 #65 Text 0 File Cdrdrv.cpp, Line 1282 11:46:05.875 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:47:35 #66 Text 0 File Cdrdrv.cpp, Line 1282 11:47:35.343 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:47:57 #67 Text 0 File Cdrdrv.cpp, Line 1282 11:47:57.812 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:47:57 #68 Text 0 File Cdrdrv.cpp, Line 1282 11:47:57.859 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:48:41 #69 Text 0 File Cdrdrv.cpp, Line 1282 11:48:41.937 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:48:56 #70 Text 0 File Cdrdrv.cpp, Line 1282 11:48:56.906 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:48:56 #71 Text 0 File Cdrdrv.cpp, Line 1282 11:48:56.953 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:49:31 #72 Text 0 File Cdrdrv.cpp, Line 1282 11:49:31.250 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:49:31 #73 Text 0 File Cdrdrv.cpp, Line 1282 11:49:31.296 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:49:31 #74 Text 0 File Cdrdrv.cpp, Line 1282 11:49:31.343 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:49:32 #75 Text 0 File Cdrdrv.cpp, Line 1282 11:49:32.875 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:49:50 #76 Text 0 File Cdrdrv.cpp, Line 1282 11:49:50.062 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:49:50 #77 Text 0 File Cdrdrv.cpp, Line 1282 11:49:50.109 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:50:02 #78 Text 0 File Cdrdrv.cpp, Line 1282 11:50:02.890 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:50:02 #79 Text 0 File Cdrdrv.cpp, Line 1282 11:50:02.937 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:50:18 #80 Text 0 File Cdrdrv.cpp, Line 1282 11:50:18.843 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:50:18 #81 Text 0 File Cdrdrv.cpp, Line 1282 11:50:18.890 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:50:24 #82 Text 0 File Cdrdrv.cpp, Line 1282 11:50:24.484 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:50:24 #83 Text 0 File Cdrdrv.cpp, Line 1282 11:50:24.531 - PIONEER DVD-RW DVR-108H2 T0 : Queue again later
11:50:31 #84 Text 0 File WriterStatus.cpp, Line 116 <PIONEER DVD-RW DVR-108 > start writing Lead-Out at LBA 2286128 (22E230h), lenght 0 blocks
11:50:31 #85 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion
11:50:37 #86 Text 0 File DVDPlusRW.cpp, Line 827 Media-Format will be stopped after burning
11:50:37 #87 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders
11:51:01 #88 Phase 37 File dlgbrnst.cpp, Line 1832 Burn process completed successfully at 4x (5 540 KB/s)
11:51:01 #89 Phase 78 File dlgbrnst.cpp, Line 1832 Data verification started
11:55:56 #90 SectorVerify 11 File Cdrdrv.cpp, Line 9320 Sector 1107208 on disc has different content to source
11:58:19 #91 SectorVerify 11 File Cdrdrv.cpp, Line 9320 Sector 1220455 on disc has different content to source
11:59:29 #92 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion
11:59:29 #93 SectorVerify 11 File Cdrdrv.cpp, Line 9320 Sector 1906419 on disc has different content to source
11:59:29 #94 Phase 81 File dlgbrnst.cpp, Line 1832 Data verification failed
Existing drivers: File 'DriversPXHELP20.SYS': Ver=2.02.62a, size 016 bytes, created 28/10/2003 11:02:00 (Prassi/Veritas driver for win 2K) File 'Driversnvidesm.sys': Ver=5.10.2600.0307 built by: WinDDK, size 224 bytes, created 13/11/2002 08:10:00 (Adapter driver for rec)
non, pour l'instant je m'acharne a tester toutes les configs materielles
possibles (ide master, slave)
Emmanuel
Avant de le ramener sous garantie, qulaqu'un aurai une idée?
salut,
J'ai eu un pb similaire la semaine dernière (cf mon message du 04/01). Je n'ai plus de soucis depuis que j'ai supprimé le léger overclocking que j'imposais à ma machine ! Pourtant elle fonctionnait très bien à part cet ennui de plantage de galette...
En espérant t'avoir aidé,
Cordialement Emmanuel
Avant de le ramener sous garantie, qulaqu'un aurai une idée?
salut,
J'ai eu un pb similaire la semaine dernière (cf mon message du 04/01).
Je n'ai plus de soucis depuis que j'ai supprimé le léger overclocking
que j'imposais à ma machine !
Pourtant elle fonctionnait très bien à part cet ennui de plantage de
galette...
Avant de le ramener sous garantie, qulaqu'un aurai une idée?
salut,
J'ai eu un pb similaire la semaine dernière (cf mon message du 04/01). Je n'ai plus de soucis depuis que j'ai supprimé le léger overclocking que j'imposais à ma machine ! Pourtant elle fonctionnait très bien à part cet ennui de plantage de galette...
En espérant t'avoir aidé,
Cordialement Emmanuel
ZAY
Et si Bertrand faisait un essai avec un autre logiciel ; pour s'assurer que ce n'est pas un prob logiciel ; Aussi à voir espace disque suffisant etc ...et les types de dvd ZAY "Emmanuel" a écrit dans le message de news:crrilf$163$
Avant de le ramener sous garantie, qulaqu'un aurai une idée?
salut,
J'ai eu un pb similaire la semaine dernière (cf mon message du 04/01). Je n'ai plus de soucis depuis que j'ai supprimé le léger overclocking que j'imposais à ma machine ! Pourtant elle fonctionnait très bien à part cet ennui de plantage de galette...
En espérant t'avoir aidé,
Cordialement Emmanuel
Et si Bertrand faisait un essai avec un autre logiciel ; pour s'assurer que
ce n'est pas un prob logiciel ;
Aussi à voir espace disque suffisant etc ...et les types de dvd
ZAY
"Emmanuel" <fhf@dfg.fr> a écrit dans le message de
news:crrilf$163$1@news.tiscali.fr...
Avant de le ramener sous garantie, qulaqu'un aurai une idée?
salut,
J'ai eu un pb similaire la semaine dernière (cf mon message du 04/01).
Je n'ai plus de soucis depuis que j'ai supprimé le léger overclocking
que j'imposais à ma machine !
Pourtant elle fonctionnait très bien à part cet ennui de plantage de
galette...
Et si Bertrand faisait un essai avec un autre logiciel ; pour s'assurer que ce n'est pas un prob logiciel ; Aussi à voir espace disque suffisant etc ...et les types de dvd ZAY "Emmanuel" a écrit dans le message de news:crrilf$163$
Avant de le ramener sous garantie, qulaqu'un aurai une idée?
salut,
J'ai eu un pb similaire la semaine dernière (cf mon message du 04/01). Je n'ai plus de soucis depuis que j'ai supprimé le léger overclocking que j'imposais à ma machine ! Pourtant elle fonctionnait très bien à part cet ennui de plantage de galette...
Eleveurs et agriculteurs polluent encore et toujours la Bretagne alors que bertrand nous narre ce qui suit en ce 9/01/2005 15:50 :
non, pour l'instant je m'acharne a tester toutes les configs materielles possibles (ide master, slave)
Avant toute prochaine réponse, va faire un tour là :
http://www.giromini.org/usenet-fr/repondre.html
et respecte les contributeurs de ce groupe qui sont en RTC ! Tu quotes comme un goret ! -- docanski
Nature, histoire et légendes en - Côtes du nord de la Bretagne - Vallée de la Rance maritime Memento des champignons http://armorance.free.fr
bertrand
Eleveurs et agriculteurs polluent encore et toujours la Bretagne alors que bertrand nous narre ce qui suit en ce 9/01/2005 15:50 :
non, pour l'instant je m'acharne a tester toutes les configs materielles possibles (ide master, slave)
Avant toute prochaine réponse, va faire un tour là :
http://www.giromini.org/usenet-fr/repondre.html
et respecte les contributeurs de ce groupe qui sont en RTC ! Tu quotes comme un goret ! desolé mais je pensais que les ligne adsl etait tirées j'usqu'en Armorique.
Eleveurs et agriculteurs polluent encore et toujours la Bretagne alors
que bertrand nous narre ce qui suit en ce 9/01/2005 15:50 :
non, pour l'instant je m'acharne a tester toutes les configs
materielles possibles (ide master, slave)
Avant toute prochaine réponse, va faire un tour là :
http://www.giromini.org/usenet-fr/repondre.html
et respecte les contributeurs de ce groupe qui sont en RTC !
Tu quotes comme un goret !
desolé mais je pensais que les ligne adsl etait tirées j'usqu'en Armorique.
Eleveurs et agriculteurs polluent encore et toujours la Bretagne alors que bertrand nous narre ce qui suit en ce 9/01/2005 15:50 :
non, pour l'instant je m'acharne a tester toutes les configs materielles possibles (ide master, slave)
Avant toute prochaine réponse, va faire un tour là :
http://www.giromini.org/usenet-fr/repondre.html
et respecte les contributeurs de ce groupe qui sont en RTC ! Tu quotes comme un goret ! desolé mais je pensais que les ligne adsl etait tirées j'usqu'en Armorique.